Tuesday, July 19, 2011

So What is Phase-Two

As we begin Phase-Two we see People, Ideas & Objects move away from our heavy focus on research. And turn our attention to the commercialization of the Intellectual Property (IP) contained within that research and this communities development. This is done with the objective of completing the Preliminary Specification and ultimately building the software that is defined there. With this blog post I have now updated the knol where the Preliminary Specification is listed. There is now a thorough understanding of the requirements of what people will need to see in order to participate, and the key deliverables of the Preliminary Specification. It’s still brief, but that’s the point, it has to be.

One of the key points noted is the budget for the Preliminary Specification has been set at $100 million. The controversial nature of the size of this budget will lead to much discussion. However, the more time and energy spent at the beginning in these tasks the less that will be spent in the long run in terms of actual development. These Preliminary costs also represent as little as 5 - 10% of the total software development budget. I don’t want to pollute this blog or the knol with discussion about the budget and therefore ask if you have comments to direct them to my email here.

The source of these funds for the Preliminary Specifications budget is based on the 2010 and 2011 fees and penalties that have been assessed at $1.00 per year and $3.00 per year, per barrel of oil equivalent, per year. Please see our Revenue Model for more information. Therefore if a producer was producing on average 40,000 barrels of oil per day over the past two years, the costs for them to participate in the development of the Preliminary Specification would be (2010 $160,000 and 2011 $160,000) = $320,000 for the two years. These costs are for the software development; and provide the producer with the opportunity to have their needs specifically addressed in the software development process. Today its not enough to own the oil and gas asset. You must also have access to the most efficient software systems that make the oil and gas assets profitable. Having direct participation in the development of that software will be an additional competitive advantage for the producer. That's what People, Ideas & Objects are offering.

One key change in the Phase Two proposal is that we have centralized all of our operations in Houston. The President, COO, CFO, VP Community Development, VP Development, and VP Business Development will be based there as will all of their teams. (Previously the development team was to be in California). Houston provides the ideal location if during the Preliminary Specification the scope of the application is determined to be an “Americas” based or “Global” based solution. (P.S. Now would be a good time to start thinking about the many positions discussed in the proposal. People, Ideas & Objects (PI&O’s) will consider people for direct hires and those that are seconded from participating producers.)

In an April blog post we noted that management were too conflicted to participate in the financing of this project. That we were instead turning to the ownership class to fund our capital needs. Phase Two is not a development term but a business term of moving to a more mature foundation. It is not that we're seeking to source our funds directly from the ownership class but to have the ownership class direct management to participate. Doing "something" comes down to industry supporting PI&O's Revenue Model. Only then will anything substantial begin. People, Ideas & Objects revenue is based on a producers reasonable share of the costs of software developments, not on PI&O's cash balances.

For the industry to successfully provide for the consumers energy demands, it’s necessary to build the systems that identify and support the Joint Operating Committee. Building the Preliminary Specification is the focus of People, Ideas & Objects. Producers are encouraged to contact me in order to support our Revenue Model and begin their participation in these communities. Those individuals that are interested in joining People, Ideas & Objects can join me here and begin building the software necessary for the successful and innovative oil and gas industry.

Please note what Google+ provides us is the opportunity to prove that People, Ideas & Objects are committed to developing this community. That this is user developed software, not change that is driven from the top down. Join me on the People, Ideas & Objects Google+ Circle and begin building the community for the development of the Preliminary Specification. Email me here if you need an invite.

Monday, July 18, 2011

Where we are at, Phase-Two Begins


The sabbatical is over and its time to get back to work. It’s been a restful and worthwhile break to recharge the batteries to make the crucial transition from phase one of the project to begin the second phase. It’s therefore best to start off with a quick summary of where we are at in terms of how we left things before the sabbatical.

Most importantly is the Draft Specification which was published in July 2008 and forms the basis or foundation of the second phase of our software developments, the Preliminary Specification. This eleven module system description defines what a producer firms systems would look like when we use the Joint Operating Committee as the key organizational construct of the innovative oil and gas producer. It is radically different and provides an overall vision of how producers would manage their assets in the most profitable manner. The Draft Specification is available for review on two pages located here.

From the period of time between August 2008 to May of 2010 we undertook a detailed discussion of how and what the Draft Specifications impact would have on an oil and gas concern. Taking issues and opportunities of the day and applying them to the specification. Providing real life testing and understanding of these ideas. We also had the opportunity to take McKinsey’s and others research and apply it to further broaden the overall understanding of the Draft Specification. These blog posts can be sourced through the archive during the period noted, or through the McKinsey label.

Although we continue to promote the Draft Specification from time to time we began to move the project forward with some specific deliverables in 2010. During the period June - August 2010 we developed the Phase Two proposal that forms the framework of the second phase of the work that is now ahead of us. These blog posts can be aggregated by selecting the Phase-Two label in the blog. One important difference between what is stated in that period and now is that I will be clearer on the budget requirements of the Preliminary Specification. So stay tuned for that.

Lastly during the time frame of August 2010 to January 2011, or the beginning of our sabbatical, we reviewed the key points in the Preliminary Research report. Our special emphasis was on Professor Giovanni Dosi’s paper “Sources, Procedures, and Microeconomic Effects of Innovation”. These blog posts can be aggregated by selecting the “Review” or “Dosi” label. I highly recommend reviewing this work thoroughly. Professor Dosi’s work is very pertinent and applicable to using the Joint Operating Committee in the manner that the Draft Specification suggests. In fact the Draft Specification is designed using the research of Dosi’s and many others research and therefore makes the understanding of his work critical.

It is on that note that we say so long to the heavy emphasis on research. I expect that the primary focus on research will fade from this blogs pages. We are moving to a commercial forum and one that focuses on building software. Research has provided us with a broad base of understanding and a foundation of almost 800,000 words of how the Joint Operating Committee builds real value for the innovative oil and gas producer. Now we turn to a new a focus that builds on that foundation. We are now focused on building the software that makes that value real. Value that recognizes that it its not just ownership of the oil and gas assets; but also access to the most innovative software to provide the most profitable means of oil and gas operation.

For the industry to successfully provide for the consumers energy demands, it’s necessary to build the systems that identify and support the Joint Operating Committee. Building the Preliminary Specification is the focus of People, Ideas & Objects. Producers are encouraged to contact me in order to support our Revenue Model and begin their participation in these communities. Those individuals that are interested in joining People, Ideas & Objects can join me here and begin building the software necessary for the successful and innovative oil and gas industry.

Please note what Google+ provides us is the opportunity to prove that People, Ideas & Objects are committed to developing this community. That this is user developed software, not change that is driven from the top down. Join me on the People, Ideas & Objects Google+ Circle and begin building the community for the development of the Preliminary Specification. Email me here if you need an invite.

Sunday, July 17, 2011

We're on Google+


In what has to be considered perfect timing. The public debut of Google+ has just been announced. Google+ is Google’s new social network tool that is available to anyone that has a Google Account. (If you need an invitation to Google+ please email me here.) This is perfect timing in the sense that we are returning from our sabbatical to begin the development of the community, and Google+ is the tool to help us make that happen.

What’s different about Google+ in comparison to Facebook and Twitter is that it provides both services in one. That is to say you can broadcast a simple message to everyone that follows you, just like Twitter and Facebook does. Or your able to control the messages you send to just the Circle of people that you want. Two additional features are that you can set up “hangouts” which provides video chat with up to ten people at the same time, and Sparks which can search and deliver content on different topics.

What Google+ provides us with is the opportunity to prove that People, Ideas & Objects are committed to developing this community. That this is user developed software, not change that is driven from the top down. Join me on the People, Ideas & Objects Google+ Circle and begin building the community for the development of the Preliminary Specification. Please email me here if you need an invite to Google+ and lets get started.

For the industry to successfully provide for the consumers energy demands, it’s necessary to build the systems that identify and support the Joint Operating Committee. Building the Preliminary Specification is the focus of People, Ideas & Objects. Producers are encouraged to contact me in order to support our Revenue Model and begin their participation in these communities. Those individuals that are interested in joining People, Ideas & Objects can join me here and begin building the software necessary for the successful and innovative oil and gas industry.

Saturday, April 02, 2011

2011 Funding Update


The results of our 2011 first quarter funding campaign can now be reported. As was expected, none of the producer firms chose to participate in the funding or support of People, Ideas & Objects. From our perspective, we see this as evidence that management are too conflicted to participate in this project. The only way forward through this deadlock will be from the explicit direction of the ownership class of the producers. It is therefore anticipated that this project will proceed on a somewhat brick-by-brick and stick-by-stick basis. Stay tuned.

It is now time for producers to act. Review of our Revenue Model will inform producers how they can participate in the development of People, Ideas & Objects Preliminary Specification. Producers can contact me here for further information, or to begin the process of their participation.

Wednesday, January 26, 2011

Professor Giovanni Dosi, Part XVII, a Conclusion


Our review of Professor Giovanni Dosi’s 1988 paper “Sources, Procedures, and Microeconomic Effects of Innovation” has provided us with the evidence that the Joint Operating Committee is the “innovation” framework for all oil and gas producers. Identifying the “innovation” framework as part of the Joint Operating Committee along with the legal, financial, operational decision making, cultural, communication and strategic frameworks. People, Ideas & Objects Draft and Preliminary Specifications identify and support the Joint Operating Committee as the key organizational construct of the innovative oil and gas producer. We provide this by moving the compliance and governance frameworks of the hierarchy into alignment with the seven frameworks of the Joint Operating Committee. Enabling a greater speed, accountability and innovativeness of the producer.

It is now time for producers to act. Review of our Revenue Model will inform producers how they can participate in the development of People, Ideas & Objects Preliminary Specification. Producers can contact me here for further information, or to begin the process of their participation.

Monday, January 17, 2011

Professor Giovanni Dosi, Part XVI

With this post we have completed the review of Professor Giovanni Dosi’s 1988 paper “Sources, Procedures and Microeconomic Effects of Innovation”. After this post I will have some closing comments and a review of the papers highlights in future posts.

Characteristics of Innovation and Patterns of Industrial Change.

Professor Dosi states that the rate of change and observed dynamics of industrial performance can be attributed to the following components:

Innovative learning by single firms augmented by universities and government agencies. 

People, Ideas & Objects asks: what would be the effect of increasing the exposure from a single firm, to a collaboration between several firms through the Joint Operating Committee? Would this facilitate a marked increase in Joint Operating Committee knowledge? And would this knowledge therefore facilitate an increased rate of collaborations leading to an increased level of understanding and pace of innovativeness and scientific knowledge? Or as Dosi notes:

The diffusion of innovation, the knowledge of innovative products and processes. 

Professor Dosi states that his general interpretative conjectures are: (And these are an important consideration in determining the capability and capacity to innovate.)

First, the empirical variety in the patterns of industrial change is explained by different combinations of selection, learning, and diffusion and different learning mechanisms. (p. 1159)
Second the nature of each technological paradigm, with its innovative opportunities, appropriability conditions and so on help to explain the observed inter-sectoral differences in the importance of the above three processes. (p. 1159)

Each successful innovation creates an asymmetry effect, or an overall increase in competitive position of the entire industry. However, that does not necessarily increase the competitiveness of all the participants of the industry. The ability of laggard companies to improve their competitive position helps to form new positions within their industries. These laggard companies generally are able to move further and quicker through their imitation of leading companies. However, the primary differentiating component of competition based on innovation in process and product is attributable to the innovative capability of the firm.  ie. a laggard will remain a laggard without the direct and active development of innovative appropriability conditions.

Professor Dosi finds these points difficult to quantify and prove, but states these may be tacitly understood. People, Ideas & Objects asserts that that was the case in 1988 at the time this article was written, however, the laggards ability to “keep up” or even “catch up” may have progressively diminished through the application of information technology during the 2000’s.

There is a determining paradox for the ability to innovate based on imitation or strict Research and Development. Companies can copy others innovations in industries with minimal asymmetry, (where they are all the same). Whereas industries that are asymmetric (like oil and gas) or have large variances in their capabilities are best served by differentiating themselves by pursuit of Research and Development.

One can see with the difficulty of this discussion; how and where innovation and research & development are done in oil and gas. The discussion to this point is ripe with conflict and contradictions, the raw material for solutions. In the Draft Specification’s eleven modules their are two specific modules that deal with these problems. One module is the Research & Capabilities Module which is the Firm based module, the other a Joint Operating Committee module called the Knowledge & Learning Module. Please review those as to how this division of labor is determined in the People, Ideas & Objects Draft Specification.

It is now time for producers to act. Review of our Revenue Model will inform producers how they can participate in the development of People, Ideas & Objects Preliminary Specification. Producers can contact me here for further information, or to begin the process of their participation.

Friday, January 14, 2011

McKinsey, When Failure is not an Option, Part 2

McKinsey have published the second part of this highly applicable series on Joint Ventures. Our review of the first part of this McKinsey series was published in September 2010. Part 2 of this article discusses several points that are in direct support for People, Ideas & Objects. A bold statement, however, one that will be proven valid through our review of this document. Specifically the three points that are verified in this post are.

  1. The need to have a third party provide the software development service that People, Ideas & Objects proposes. 
  2. The Military Command & Control Metaphor, that was developed in the Draft Specification, provides an industry wide governance model that is directly supported in this article. 
  3. Compliance, on an automated scale, is a necessary component of the governance and third party nature of the offering noted in 1) and 2). 

We begin with a quotation that summarizes the state of affairs in the oil and gas industry.
As we discussed in the first article of this series, the scale, complexity and risk associated with the execution of large scale projects frequently leads to joint venture constructs as a way to introduce expertise, diversify risk and gain access to capital. We also observed that, up until recently, the majority of these partnerships consisted of a dominant, operating partner that provided the bulk of the resources and leadership, paired with one or more relatively silent partners in the background. Interestingly, this trend has shifted dramatically over the last decade, and project JVs are increasingly becoming a “partnerships of equals”, with shared governance, staffing and execution responsibilities distributed among the participants.
McKinsey use the example of a large refinery to show the difficulty in managing a large Joint Venture today. They detail the four major risk factors that are evident in the case example, and I would note that these are the issues, to a greater or lesser extent, that are pre-eminent in all oil and gas ventures;

  • Cross-cultural challenges associated with the introduction of sovereign nationals and international corporate employees
  • Inter-company incentive and strategic misalignment between two (or more) principle investors
  • Expertise, system and process friction between the various contractor and subcontractor teams, who may have alliances or other preferred relationships with one of the JV partners
  • Normal” start-up risks associated with the scale-up and development of a project “new-co”, the on-boarding of new JV employees, integrating staff from the partners who have been seconded to the JV, and greenfield development of new systems and processes, among others.

There’s no denying these are the issues that all oil and gas projects are facing. McKinsey offer a four step solution that dovetails with the Draft Specification. If we ask first hand, “what if” there were standard systems and procedures that were used for all Joint Operating Committees across the oil and gas industry? Where the ability to assign a generic template of assignable roles and responsibilities. Where the compliance and governance of each jurisdiction is embedded within the third party vendors (People, Ideas & Objects) software's policies and procedures. Where the generic management of the Joint Operating Committee was handled through software provided by a third party that represented all producers. Software that managed each of the producers compliance for the various jurisdictions in which they operated, to the governance of the people that were pooled by the various firms represented in the Joint Operating Committee. This brief vision of what People, Ideas & Objects is proposing in the Draft Specification is being mirrored in this discussion of McKinsey’s four steps. We begin.

Step 1 Define and Align

Alignment is difficult to attain within the oil and gas industry for the many reasons cited in the subsequent McKinsey quote. We need to begin by aligning the compliance and governance frameworks of the hierarchy, moving these two frameworks into alignment with the legal, financial, operational decision making, communication, cultural and innovation frameworks of the Joint Operating Committee. Talk of alignment with out building the software that identifies and supports the alignment of these eight frameworks, first and foremost, is just more talk. One of the key benefits of doing this is the alignment of compliance with operational decision making. The net benefit of which is greater accountability. But by combining all eight of these frameworks we are making the Joint Operating Committee capable of dealing with the all aspects of the producer(s) needs.

McKinsey note:
...project JVs often begin by bringing together unlikely allies whose goals, cultures, operating models, risk appetites, and financial strengths are apt to vary widely. Identifying the disparate goals, models and strengths and weaving them into a single, aligned and broadly-communicated vision is critical for an effective JV to function effectively. This vision supported by a number of underlying organizational themes and parameters creates a common language for the JV, and is a reinforcing mechanism for maintaining alignment across all partners.
What I am asserting here is the need to have the generic business aligned around the Joint Operating Committee so that the vision of the JV can become the focus of those working within the project / property.

Step 2 Build

I want to limit the discussion to the governance related points. I will therefore note the following McKinsey quote and refer to the related discussion in Step 3 Execute, below.
The process of building the team should start with recruiting the best people from each participating partner. This can be quite a challenge, as top talent often see joining the JV as a career- limiting move, putting them “out of sight, out of mind”, for years. And, since the JV’s priorities differ (by necessity) somewhat from those of the parent organization, even the successful achievement of those objectives by secondees may not be viewed as credible or be given the same merit by those in the parent organization.

Step 3 Execute

The Draft Specification developed the Military Command & Control Metaphor to replace the Governance of the hierarchy with a usable model within the Joint Operating Committee. A governance model that worked similar in fashion to that which the NATO forces use. One that has the various countries military forces used to deploy troops from various countries in many different theatres of war and other technically difficult operations. Looked at from both the micro and macro level, the oil and gas producer can attain the ability to deploy and redeploy resources as required across the various JOC’s they participate in. The ability to have the partnerships pool their resources, and these resources have a deemed chain of command that is recognized on an industry wide basis, with a defined roles and responsibilities that are agreed to, can provide a strong governance model to the issues that McKinsey ably addresses in the industry.

In addition to meeting these technical deliverables, team members must also

  • effectively scale the organization quickly 
  • establish a culture of self performance, and 
  • continuously adapt and evolve.

These are very different types of work, requiring a loose – tight governance model which provides the JV and project team with sufficient flexibility to grow while at the same time maintaining a rigid link to the parent companies’ governance and control mechanisms.
As the project team moves into execution, it must define a model for itself that allows it to be independent while continuing to deliver on parent companies’ needs. During execution, the leadership team also needs to think proactively about how to implement its newly constructed culture, processes and systems. Frequently complicated by a fragmented and globally disperse geographic footprint, the introduction of multiple new contractors and sub-contractors, and the fast pace at which the project evolves, it is easy to let the execution of these systems slip and to allow their effectiveness to wane. The JV leadership must establish a disciplined steering committee with direct accountability to the CEO to oversee successful implementation.

Step 4 Renew

I know I share with most people that have worked in oil and gas a feeling of frustration at the value that is occasionally lost in various Joint Operating Committees after phase changes or other transitions where people, teams, systems and procedures that were build up are left behind, dropped, shredded or forgotten. Very wasteful in the big scheme of things. Or how about the other situation that creates waste. That being the work done to manage the Joint Operating Committee, that was put together and was built as a one off installation of software and systems. Much of this work was done in recreating the wheel and as such it was “rebuilt” in order to address the unique characteristics of the property. McKinsey notes.
Perhaps the most overlooked success factor in constructing a successful project JV is to create clear opportunities for renewal. This renewal is both personal, for the individuals in the project team, as well as technical, for the systems and processes that we mentioned previously. While any project professional will readily acknowledge the dynamic and evolutionary nature of a project as it moves through its lifecycle, many frequently fail to recognize that people and systems need to evolve correspondingly. World class project JVs, on the other hand, establish clear breakpoints and formal evaluation steps, during which the leadership team evaluates the effectiveness of its people, tools and processes, and takes steps to inject fresh energy, capabilities and structure into the team where needed.
The purpose of People, Ideas & Objects is to provide a third party software development capability based on the Draft Specification. Using the Joint Operating Committee as the key organizational construct of the innovative oil and gas producer. This provides a means for all producers to mitigate these losses of value. One in which the use of a third party software vendor providing the software to run the JOC is available to all the producers of the venture. Where the software vendor is independent of each producer. Where what is learned and developed is able to be used in the future, in not just the JOC but potentially elsewhere. And what is learned elsewhere could potentially benefit the JOC.

Compliance as a potential fifth step.

Lastly I want to comment about compliance which is not directly addressed in this McKinsey article, it is a related topic that falls in with the discussion of governance. And when we are talking about compliance we are talking about the compliance of the Joint Operating Committee and its operations in whatever jurisdictions that it may be operating within. This therefore also involves the partners compliance for these operations as well.

People, Ideas & Objects as software developers could assure thousands of producers who might provide us with the financial resources to develop a software development capability that is focused on maintaining the compliance of thousands of producers with the thousands of regulatory bodies those producers have, or may have, operations in. What plans do each of these individual producers have to ensure their operations will be in compliance with these jurisdictions where the compliance requirements continue to expand? The movement of the compliance framework to the Joint Operating Committee should be seen as an opportunity to address the automation of compliance and an opportunity to integrate compliance within the other frameworks of the JOC.

To what extent can this type of automation be implemented is the question that needs to be answered. With each piece of legislation that is contemplated these days, potentially totalling several thousand pages, where the ability for people to manually keep up with the demands of the regulatory process of governments and regulators being potentially past, full automation of the compliance framework is a necessity, in my opinion.

McKinsey note toward the end of the document these possibilities exist, if only.

While JVs and projects are both uniquely challenging to execute well, there are similarities that enable world-class project managers to effectively build world-class JVs, and vice versa.

It is now time for producers to act. Review of our Revenue Model will inform producers how they can participate in the development of People, Ideas & Objects Preliminary Specification. Producers can contact me here for further information, or to begin the process of their participation.

Tuesday, January 11, 2011

And in return...

What do producers receive in exchange for fully subscribing to People, Ideas & Objects? The primary benefit is this project moves forward providing an alternative for producers to manage their assets.

Last week we noted the article in the Oil and Gas Journal regarding the Mackenzie Gas Project. How the participants were to decide in 2013 if they could proceed with the project based on their ability to staff the project. I believe People, Ideas & Objects is one alternative that needs to be considered and acted upon.

To offer a laundry list of other benefits that would be provided to producers for subscribing to this project seems academic at this point. It is now time for producers to act. Review of our Revenue Model will inform producers how they can participate in the development of People, Ideas & Objects Preliminary Specification. Producers can contact me here for further information, or to begin the process of their participation.

Monday, January 10, 2011

Professor Giovanni Dosi, Part XV

Returning to our review of Professor Giovanni Dosi’s paper “Sources, Procedures and Microeconomic Effects of Innovation” in the Journal of Economic Literature Vol. XXVI (September 1988), pp. 1120 - 1171. Recall this review of Dosi was part of our overall review of the Preliminary Research report; of which we have been aggregating all of these review posts under this blogs label “Review”. I highly recommend reviewing Professor Dosi material in detail. His 1988 paper has become one of the critical resources in the area of innovation and our use of this document was instrumental in determining the Joint Operating Committee is the key organizational construct of the innovative oil and gas producer.

Innovation and Industrial Change: Learning and Selection

A. The Innovation Process and Industrial Structures

In this post Professor Dosi asserts that the makeup of industries and companies is attributable not only to the endogenous force of competition. Innovation and imitation also make up the fundamental structure of an industry. “Market structure and technological performance are endogenously generated by three underlying sets of determinants.”

Each of these three components is evident in the marketplace of an oil and gas producer today as reflected in:

  • The structure of demand.

Satisfying the insatiable demand of the global energy marketplace is critical to the advancement of all societies. American and western societies as well as Chinese and developing societies face real challenges in sourcing adequate long term sources of energy. The long term demands on the energy producer have never been so great.

  • The nature and strength of opportunities for technological advancement.

The nature and opportunities for technological advancement lead one to believe mankind has never faced the level of opportunity and acceleration that is possible today. The industrial mechanization of the past 100 years combined with the prospective mechanization of intellectual pursuits combine to markedly appreciate the value of human life. The availability of energy will be a critical element of this advancement.

  • The ability of firms to appropriate the returns from private investment in research and development.

The oil and gas industry is moving closer to its earth science and engineering principles. Innovation, research and development in both the producer firm and the market are and will become more commercial in nature. It is on the basis of success or failure of these factors that will determine the success or failure of the firm within the industry.

Focusing these three components through the Joint Operating Committee is what People, Ideas & Objects provides through the Draft Specification. By simply moving the compliance and governance frameworks of the hierarchy over into alignment with the legal, financial, operational decision making, cultural, communication and innovation frameworks of the Joint Operating Committee. Provides the producer with greater speed, innovativeness and accountability.  But it also enables the producer to focus on innovation, research and development.

It is now time for producers to act. Review of our Revenue Model will inform producers how they can participate in the development of People, Ideas & Objects Preliminary Specification. Producers can contact me here for further information, or to begin the process of their participation.

Friday, January 07, 2011

Organizational and Change Management Resources

Today we have two articles that focus on the topic of change management and organizational change. The first article presents the results from a survey from McKinsey and is entitled “Taking organizational redesigns from plan to practice: McKinsey Global Survey results

Organizations often redesign themselves to unlock latent value. They typically pay a great deal of attention to the form of the new design, but in our experience, much less to actually making the plan happen—even though only a successfully implemented redesign generates value. A recent McKinsey survey examines the reasons executives cite for successful and unsuccessful implementations, and in doing so, offers one set of explanations for why organizational transformations so rarely succeed. This survey asked why organizations redesigned, what challenges they faced, what tactics they used for implementation, and how the redesign and its delivery affected employee morale and shareholder value.
The second article is from Booz & Co. Strategy + Business and is entitled “Making Change Happen, and Making It Stick
Few organizations have escaped the need for major change in the past decade, as new technologies and global crises have reshaped entire industries. However, the fact that change has become more frequent does not make such changes any easier.
As we noted this past week, People, Ideas & Objects are not change agents but solutions providers. These documents provide industry with a hint of the organizational and change management resources that are available.

It is now time for producers to act. Review of our Revenue Model will inform producers how they can participate in the development of People, Ideas & Objects Preliminary Specification. Producers can contact me here for further information, or to begin the process of their participation.