The Preliminary Specification Part CCLI (K&L Part XXIV)

In today’s post we want to talk about some of the learning elements of the Knowledge & Learning module of the Preliminary Specification. Having tight operational control during operations leads to a situation where the chance for learning may seem limited. However, the very temporary nature of the operation should lead to the dynamics of the marketplace providing for further learning opportunities. Quotations are from Professor Richard Langlois’ paper “Transaction Cost Economics in Real Time”.

A market form of organization is capable of learning and creating new capabilities, often in a self reinforcing and synergistic way. Marshall describes just such a system when he talks about the benefits of localized industry. (Marshall, 2961, IV .x.3, p. 271) p. 120

In many ways the characteristics of a learning environment are different from that of an environment designed for operational control. Professor Langlois talks about getting everyone on the same wavelength as one of the objectives of operational coordination. And we have done that by unifying everyone around the capabilities in the “Dynamic Capabilities Interface”. This by its nature is counter to the needs of a learning organization.

In this sense, the ability of a large organization to coordinate the implementation of an innovation, which is clearly an advantage in some situations, may be a disadvantage in other ways. Coordination means getting everyone on the same wavelength. But the variation that drives an evolutionary learning system depends on people being on different wavelengths - it depends, in effect, on out-breeding. This is something much more difficult to achieve in a large organization than in a disintegrated system. Indeed, as Cohen and Levinthal (1990a, p. 132) point out, an organization experiencing rapid change ought in effect to emulate a market in its ability to expose to the environment a broad range of knowledge gathering 'receptors'. p. 120

So how is it that these two opposing and contradictory objectives are paired together in one module. There are phases of when the team is being put together, understanding what the operation is and learning the capabilities that are going to be deployed. Bringing in the latest field operations staff and equipment to the job. These are the times in which learning is occurring throughout the group. Then the operational control phase begins in which nothing but the execution of the plan is the concern of the group. The learning is over for the period in which this is happening. There is however, a point at the end of the execution in which the group should input the lessons that they learned into the “Lessons Learned Interface”.

How would learning proceed in a system of decentralized capabilities? As I have already suggested, progress would take place autonomously within the decentralized stages. There would be no need for integration unless a systemic innovation offering superior performance arrives on the scene. Indeed, as we have seen, fixed task boundaries and standardized connections between stages might make innovation difficult with the existing structure, requiring a kind of creative destruction. (Schumpeter, 1950). p. 121

The “Lessons Learned Interface” is presented to the people who are representatives of the participant producer firms in the Joint Operating Committee. Results are also presented in the Compliance & Governance and Research & Capabilities modules of the producer firms for all of the Joint Operating Committees they participate in. There they can update the specific capabilities in the “Dynamic Capabilities Interface” and members of the governance team can see if there are any systemic errors being made throughout the organization.

Although they are at opposite ends of the innovation scale. Operational control and learning within one module make sense when the feedback from those operations is critical to future operations. Learning is a part of innovation and it must update the capabilities of the firm and Joint Operating Committees in order to build value for the long term.

For the industry to successfully provide for the consumers energy demands, it’s necessary to build the systems that identify and support the Joint Operating Committee. Building the Preliminary Specification is the focus of People, Ideas & Objects. Producers are encouraged to contact me in order to support our Revenue Model and begin their participation in these communities. Those individuals that are interested in joining People, Ideas & Objects can join me here and begin building the software necessary for the successful and innovative oil and gas industry.

Please note what Google+ provides us is the opportunity to prove that People, Ideas & Objects are committed to developing this community. That this is user developed software, not change that is driven from the top down. Join me on the People, Ideas & Objects Google+ Circle (private circle, accessible by members only) and begin building the community for the development of the Preliminary Specification.

The Preliminary Specification Part CCL (K&L Part XXIII)

So what do we have so far in the Knowledge & Learning module. I thought it might be a good time to take a quick review of the situation and the module from the point of view of the Joint Operating Committee. Providing a summary look at the methods of how the information is provided and used by the people who work within the JOC and the service industry, and those that will have access to the various interfaces of the Knowledge & Learning module of the Preliminary Specification.

It should be that each capability that is listed in the “Dynamic Capabilities Interface” be given a serial number that is unique within the entire oil and gas industry. That way when they are presented to the Joint Operating Committee there will be no confusion as to the number of the capability that is selected. This technically isn’t an issue, however, with the interactions between multiple producers in multiple Joint Operating Committees it is probably a necessity.

Recall we have the football analogy that the operational decision is made to employ x capability on the property. Then everyone has access to that capability and are able to review the explicit knowledge that is contained within the document. This includes the engineers and geologists from the various producer firms that participate in the Joint Operating Committee, and the field operations representatives that have been contracted to provide services. Everyone working from the “same page” in terms of expectations in terms of what the operations is going to be.

Once the decision is made to employ x capability, the capability is selected in the “Planning & Deployment Interface” where the people are assigned their roles and responsibilities in the Military Command & Control Metaphor. This will impose a chain of command in how the operation is run and who has what authority over what operation. Additionally the AFE associated with the operation will be included with the “Planning & Deployment Interface” to impose the budgetary control over the operation. Lastly the Job Order system is made available to implement the commands to execute the operation. It is in here, the “Planning & Deployment Interface” where the operational budget, command and control, execution and authorization are planned for and managed. As we have mentioned elsewhere, innovation and free markets are what we are seeking to obtain in the service industry and the greater oil and gas industry. This however does not preclude high levels of tight operational control during the times when it is required.

The People, Ideas & Objects Preliminary Specification moves the innovative oil and gas producer to the “decentralized production model.” Where the ability to shut in marginal production is possible during times of volatile energy prices. The decentralized production model, as we have discussed in other modules, also reduces the operational and overhead costs of the shut in production so that the cost is minimal to the producer firm. It is during the time of low oil and gas prices that the Joint Operating Committee can review the capabilities provided by the participating producers in the “Dynamic Capabilities Interface.” This review will be to determine which capabilities can be deployed that will reduce the costs of the JOC’s cost of operating, or enhance the revenues and return the property to production and profitability sooner.

Making operational control, and review & deployment of the participating producers state of the art capabilities some of the key attributes of the Knowledge & Learning module.

For the industry to successfully provide for the consumers energy demands, it’s necessary to build the systems that identify and support the Joint Operating Committee. Building the Preliminary Specification is the focus of People, Ideas & Objects. Producers are encouraged to contact me in order to support our Revenue Model and begin their participation in these communities. Those individuals that are interested in joining People, Ideas & Objects can join me here and begin building the software necessary for the successful and innovative oil and gas industry.

Please note what Google+ provides us is the opportunity to prove that People, Ideas & Objects are committed to developing this community. That this is user developed software, not change that is driven from the top down. Join me on the People, Ideas & Objects Google+ Circle (private circle, accessible by members only) and begin building the community for the development of the Preliminary Specification.

The Preliminary Specification Part CCXLIX (K&L Part XXII)

In today’s post we want to discuss how capabilities are viewed by the users of the information in the interfaces of the Knowledge & Learning module of the Preliminary Specification. After all the amount of information contained within a capability listed within the “Dynamic Capability Interface” to conduct a certain operation would be detailed and it would be inefficient to have everyone reading the same text over and over again. That is why we have computers. We also want to discuss the different types of knowledge (tacit and explicit, or formal knowledge) and note the deficiencies in recording tacit knowledge. In today’s post I’ll be quoting from Professor Richard Langlois’ paper “Transaction Cost Economics in Real Time”.

'Routines,' write Nelson and Winter (1982, p. 124), 'are the skills of an organization.' p. 106

When the user is presented with a view of the capabilities within the “Planning & Deployment Interface” they are provided with several different views of the same data. One is the comprehensive view of the capabilities (explicit knowledge) which includes the full extent of the capabilities. Another is just the changes that have been made since the last time the user viewed the document. This can be presented to the user by fading the already viewed text by 50% so that only the new information stands out. Leaving the user to learn just what has changed in the capabilities since the last time they were viewed. There should also be some annotations for the user to learn who authored the changes and when they were authored so that if there are any follow up questions they’ll know who to contact.

The capabilities will include the explicit knowledge of the operation and the necessary information of whom is responsible for the tacit knowledge. Having this information updated by reviewing only the clear text will enable the user to get up to speed on the changes within seconds. Since the capabilities will be the source for all of the people who are working on the operation everyone will be on the “same page” in terms of the most up to date capabilities and the individuals who are responsible for them.

Such tacit knowledge is fundamentally empirical: it is gained through imitation and repetition not through conscious analysis or explicit instruction. This certainly does not mean that humans are incapable of innovation; but it does mean that there are limits to what conscious attention can accomplish. It is only because much of life is a matter of tacit knowledge and unconscious rules that conscious attention can produce as much as it does." p. 106

Getting a handle on these interfaces is of premier importance to the innovative oil and gas producer. This may seem to be an academic exercise for some that will not bear any fruit. However, these are core to the value of the Joint Operating Committee and the producer firm. It is the actions and interactions that are derivative of these capabilities that will determine the success or failure of the innovative oil and gas firm.

In a metaphoric sense, at least, the capabilities or the organization are more than the sum (whatever that means) of the 'skill' of the firm’s physical capital, there is also the matter of organization. How the firm is organized - how the routines of the humans and machines are linked together - is also part of a firm's capabilities. Indeed, 'skills, organization, and technology are intimately intertwined in a functioning routine, and it is difficult to say exactly where one aspect ends and another begins' (Nelson and Winter, 1982, p. 104). p. 106

and

But often - and especially when innovation is involved - the links among firms are of a more complex sort, involving everything from informal swaps of information (von Hippel, 1989) to joint ventures and other formal collaborative arrangements (Mowery, 1989). All firms must rely on the capabilities owned by others, especially to the extent those capabilities are dissimilar to those the firm possesses. p. 108

For the industry to successfully provide for the consumers energy demands, it’s necessary to build the systems that identify and support the Joint Operating Committee. Building the Preliminary Specification is the focus of People, Ideas & Objects. Producers are encouraged to contact me in order to support our Revenue Model and begin their participation in these communities. Those individuals that are interested in joining People, Ideas & Objects can join me here and begin building the software necessary for the successful and innovative oil and gas industry.

Please note what Google+ provides us is the opportunity to prove that People, Ideas & Objects are committed to developing this community. That this is user developed software, not change that is driven from the top down. Join me on the People, Ideas & Objects Google+ Circle (private circle, accessible by members only) and begin building the community for the development of the Preliminary Specification.

The Preliminary Specification Part CCXLVIII (K&L Part XXI)

We now shift gears from a discussion of modularity to dynamic transaction costs. It is through the interactions that are developed in the Research & Capabilities and Knowledge & Learning modules that the capabilities of the producers and the markets will change. These changes will initiate what Professor Richard Langlois calls “dynamic transaction costs.” Included in these costs will be the necessary costs of the software development capability provided by People, Ideas & Objects. Without the ability for the software to change, the organization will remain fixed and stagnate. It is a requirement that the innovative oil and gas industry obtain the dynamic software development capabilities that People, Ideas & Objects is proposing with the Preliminary Specification. That way their organizations will remain flexible and change with their needs.

The Joint Operating Committee, using the Knowledge & Learning module will be accessing the capabilities of the participating producers. They will deploy these capabilities in the service industry and develop the land and asset base of the Joint Operating Committee. During the course of its history there will be times where they will not have access to the capabilities they need. The quotes for today’s post are from Professor Richard Langlois “Transaction Cost Economics in Real Time.”

Over time, capabilities change as firms and markets learn, which implies a kind of information or knowledge cost - the cost of transferring the firm's capabilities to the market or vice-verse. These "dynamic" governance costs are the costs of persuading, negotiating and coordinating with, and teaching others. They arise in the face of change, notably technological and organizational innovation. In effect, they are the costs of not having the capabilities you need when you need them. p. 99

Throughout the Preliminary Specification we have chosen to deal with the “dynamic transaction costs” by recording them in an account labeled as such. This will help the producer firm or Joint Operating Committee to identify and begin to control these costs when they are incurred. It is reasonable to assume that in the innovative and change oriented environment that is the future of the oil and gas industry significant “dynamic transaction costs” will be incurred. And that these would fall predominantly on the Joint Operating Committee in the Knowledge & Learning module. As there would be minimal deployment of their own capabilities by the producer for their own account in the Research & Capabilities module. I am implying that the “dynamic transaction costs” will be incurred for the “persuading, negotiating and coordinating with, and teaching others” in order to acquire those capabilities.

The purpose for these “dynamic transaction costs” is of course for economic progress. Recall that through the “Dynamic Capabilities Interface” and the “Planning & Deployment Interface” which includes the AFE, Military Command & Control Metaphor and Job Order are the means in which to coordinate the capabilities available to the Joint Operating Committee. It is this coordination that employs greater divisions of labor and specialization, and improved efficiency of capital that expand the economic output of the Joint Operating Committee, producer, service, and oil and gas industries.

Economic progress, then, is for Marshall a matter of improvements in knowledge and organization as much as a matter of scale economies in the neoclassical sense. We can see this clearly in his 'law of increasing return,' which is distinctly not a law of increasing returns to scale: 'An increase of labour and capital leads generally to improved organization, which increases the efficiency of the work of labour and capital' (Marshall, 1961, IV. xiii,2 p. 318) p. 101

For the industry to successfully provide for the consumers energy demands, it’s necessary to build the systems that identify and support the Joint Operating Committee. Building the Preliminary Specification is the focus of People, Ideas & Objects. Producers are encouraged to contact me in order to support our Revenue Model and begin their participation in these communities. Those individuals that are interested in joining People, Ideas & Objects can join me here and begin building the software necessary for the successful and innovative oil and gas industry.

Please note what Google+ provides us is the opportunity to prove that People, Ideas & Objects are committed to developing this community. That this is user developed software, not change that is driven from the top down. Join me on the People, Ideas & Objects Google+ Circle (private circle, accessible by members only) and begin building the community for the development of the Preliminary Specification.

The Preliminary Specification Part CCXLVII (K&L Part XX)

We have been discussing modularity between the Research & Capabilities and Knowledge & Learning modules of the Preliminary Specification. How the knowledge, skills, experience and ideas flow from the producer firms through to the Joint Operating Committees. From the development of innovative initiatives to operational control. Today we want to discuss what is needed from a modularity point of view in order to attain these benefits. Today’s quotes come from Professor Richard Langlois paper “Organizing the Electronic Century”.

In organizational and social systems - and perhaps even in mechanical ones as well - it is possible to think of interdependency and interaction among the parts as a matter of information transmission or communication. p. 5

But this flow is also interactive. To start the process, the capabilities that are listed in the “Dynamic Capabilities Interface” are populated by relevant criteria through to the Knowledge & Learning module. However, there are lessons learned by the Joint Operating Committee in the course of the operation. And these lessons are captured in the “Lessons Learned” interface of the Knowledge & Learning module which is also populated to the Compliance & Governance module. Having direct knowledge of the operation updated to the capabilities of the producer firm in the “Dynamic Capabilities Interface” is necessary for further deployment of those capabilities. The two versions of the “Lessons Learned” interface are provided for the two different organizational constructs. One for the producer (Compliance & Governance) and one for the Joint Operating Committee (Knowledge & Learning).

Users of this information are seeking different purposes for this information. Although the environments in which the two modules are operating (Research & Capabilities and Knowledge & Learning) use the data and information in different ways. Research and innovation vs operational control. High levels of interdependency and interaction on the quality and quantity of the data and information contained within these modules exists.

Recently, Baldwin and Clark (1997, p. 86) have drawn on similar ideas from computer science to formulate some general principles of modular systems design. The decomposition of a system into modules, they argue, should involve the partitioning of information into visible design rules and hidden design parameters. The visible design rules (or visible information consists of three parts. 

• An architecture specifies what modules will be part of the system and what their function will be.
• Interfaces describe in detail how the modules will interact, including how they fit together and communicate.
• And standards test a modules conformity to design rules and measure the modules performance relative to other modules.

These visible pieces of information need to be widely shared and communicated. But contrast, the hidden design parameters are encapsulated within the modules, and they need not (indeed, should not) be communicated beyond the boundaries of the module. p. 7

As people work on both ends of the data in these modules. Engineers and geologists within the producer firms developing the capabilities in the “Dynamic Capabilities Interface”. And engineers, geologists and service industry representatives in the Joint Operating Committees on the “Lessons Learned” interface. Data and information will be updated and changed from all the participants involved in both the innovation and operational control. Providing the appropriate input and real life involvement and development of ideas and oil and gas reserves. After all, oil lives in the minds of oil men and women.

For the industry to successfully provide for the consumers energy demands, it’s necessary to build the systems that identify and support the Joint Operating Committee. Building the Preliminary Specification is the focus of People, Ideas & Objects. Producers are encouraged to contact me in order to support our Revenue Model and begin their participation in these communities. Those individuals that are interested in joining People, Ideas & Objects can join me here and begin building the software necessary for the successful and innovative oil and gas industry.

Please note what Google+ provides us is the opportunity to prove that People, Ideas & Objects are committed to developing this community. That this is user developed software, not change that is driven from the top down. Join me on the People, Ideas & Objects Google+ Circle (private circle, accessible by members only) and begin building the community for the development of the Preliminary Specification.

The Preliminary Specification Part CCXLVI (K&L Part XIX)

Throughout the fourth or capabilities pass through the Preliminary Specification we have discussed modularity from the perspective of the different modules of the specification itself. Today we want to talk about modularity from the point of view of the Knowledge & Learning module. How it isolates the Joint Operating Committee and focuses on the operations in the field. Yet provides the JOC with the most up to date information regarding capabilities from each of the participating producers. A capable, innovative Joint Operating Committee that is the legal, financial, operational decision making, cultural, communication, strategic and innovation framework of the oil and gas producer.

Within each of the Research & Capabilities modules of the participating producer firms, people are involved in the research and development of the capabilities of their respective firms. They are the ones that are field testing the innovations that the engineers and geologists are coming up with. That is the primary source of the industry innovation. Whether that is through dedicated efforts of an individual producer or through collaborative efforts with others, innovation, as we learned from our review from Professor Giovanni Dosi is through the application of these resources. Once these ideas are proven and developed into usable and valuable technologies and processes then they can be added as capabilities into their “Dynamic Capabilities Interfaces” in the Research & Capabilities modules. There they, depending on the selection of the producers criteria, might be populated to the Joint Operating Committee that is in that zone, or is able to use that multi-frac technology, and will be available to the members of that JOC for its use.

What we have been able to do with these two modules in the Preliminary Specification is to eliminate the crossover of the two different purposes of the same information. Quotations for this post are from Professor Richard Langlois’ “Organizing the Electronic Century”.

Modularity is a very general set of principles for managing complexity. By breaking up a complex system into discrete pieces - which can then communicate with one another only through standardized interfaces within a standardized architecture - one can eliminate what would otherwise be an unmanageable spaghetti tangle of systemic interconnections. p. 1

The producer firm is involved in the development and research into the improvement of how to better the production and reserves they hold. The Joint Operating Committee is involved in operational execution. These are two separate and unique organizational objectives that are necessary and involve, in some instances, the same people and the same firms. We need to separate them and provide some distance so that the ability to operate them as separate and distinct is possible.

What is new is the application of the idea of modularity not only to technological design but also to organizational design. Sanchez and Mahoney (1996) go so far as to assert that modularity in the design of products leads to - or at least ought to lead to modularity in the design of the organizations that produce such products. p. 1

There are more than the modules organizational constructs to guide the nature of the work within the modules. There is also the markets in which they operate. The Research & Capabilities will be an internal and academic focus that will be collaborative in the geological and engineering disciplines. Whereas the Knowledge & Learning will be steeped in the service industry offerings and operational control. These differences also help to differentiate the nature of the work within the two modules.

Why are some (modular) social units governed by the architecture of the organization and some governed by the larger architecture of the market? p. 2

It is necessary for innovation purposes and operational control that the two modules are separated in this fashion. With the flow of information from the Research & Capabilities to the Knowledge & Learning module, and the speed at which electrons flow, the Joint Operating Committee can be assured that they have the most recent field tested capabilities available to them.

For the industry to successfully provide for the consumers energy demands, it’s necessary to build the systems that identify and support the Joint Operating Committee. Building the Preliminary Specification is the focus of People, Ideas & Objects. Producers are encouraged to contact me in order to support our Revenue Model and begin their participation in these communities. Those individuals that are interested in joining People, Ideas & Objects can join me here and begin building the software necessary for the successful and innovative oil and gas industry.

Please note what Google+ provides us is the opportunity to prove that People, Ideas & Objects are committed to developing this community. That this is user developed software, not change that is driven from the top down. Join me on the People, Ideas & Objects Google+ Circle (private circle, accessible by members only) and begin building the community for the development of the Preliminary Specification. 

The Preliminary Specification Part CCXLV (K&L Part XVIII)

It might seem that with the opportunity to have such strong operational control provided in the Knowledge & Learning module of the Preliminary Specification. That each and every producer will be able to compete equally. That might be the way that some perceive the situation however, the fact is in an innovative environment that may not be the case. We have clarification of these points from Professor Richard Langlois in his paper “Capabilities and Governance: the Rebirth of Production in the Theory of Economic Organization”.

In a world of tacit and distributed knowledge - that is, of differential capabilities - having the same blueprints [or software] as one's competitors is unlikely to translate into having the same costs of production. Generally, in such a world, firms will not confront the same production cost for the same type of productive activity. p. 18

Producers within the same Joint Operating Committee may be pursuing different strategies than their partners in that JOC. The Preliminary Specification enables a producer to pursue the most effective strategy for each property. A producer may have acquired the property while it was in production and therefore have a different cost structure. Or alternatively the producer may have an interest in the infrastructure used to deliver the gas to market whereas the other producers do not. The makeup, the strategies and the costs of each of the producers are unique and not necessarily leading them to make the same decisions based on the same criteria.

As we noted yesterday, when the Joint Operating Committee conducts a field operation using the tools within the Knowledge & Learning module. Coordination of the capabilities is provided through the Military Command & Control Metaphor and the Job Order system. These capabilities are the knowledge, experience, skills and ideas of the people who are part of the producers in the Joint Operating Committee, and the service industry representatives hired to conduct the field operation. All of these capabilities are documented in the “Dynamic Capabilities Interface” and deployed through the “Planning & Deployment Interface”.

This in turn, implies that the capabilities may be interpreted as a distinct theory of economic organization. p. 18

Execution is the focus of the operation and the key competitive differentiation of the parties involved. Within the capabilities that have been decided to be implemented by the Joint Operating Committee there may be new and innovative tools and procedures to be implemented. The oil and gas business is based on the science of geology and geophysics and the applied science of engineering. Operational control at this level is a necessity and a competitive advantage. From Professor Langlois’ paper “Modularity in Technology, Organization and Society”.

Industrial economists tend to think of competition as occurring between atomic units called "firms." Theorists of organization tend to think about the choice among various kinds of organizational structures - what Langlois and Robertson (1995) call "business institutions.” But few have thought about the choice of business institution as a competitive weapon. p. 1

If one considers how the Knowledge & Learning module enables the producer to implement their capabilities. Calling them a competitive weapon isn’t far from the truth.

For the industry to successfully provide for the consumers energy demands, it’s necessary to build the systems that identify and support the Joint Operating Committee. Building the Preliminary Specification is the focus of People, Ideas & Objects. Producers are encouraged to contact me in order to support our Revenue Model and begin their participation in these communities. Those individuals that are interested in joining People, Ideas & Objects can join me here and begin building the software necessary for the successful and innovative oil and gas industry.

Please note what Google+ provides us is the opportunity to prove that People, Ideas & Objects are committed to developing this community. That this is user developed software, not change that is driven from the top down. Join me on the People, Ideas & Objects Google+ Circle (private circle, accessible by members only) and begin building the community for the development of the Preliminary Specification.

The Preliminary Specification Part CCXLIV (K&L Part XVII)

The energy industry is faced with a number of issues that seem to continue from year to year. One of those issues is the costs associated with any and all field work. We have heard a variety of claims made by the oil and gas companies about the service industry, but no solutions as to how to deal with them outside of the traditional cost controls and budgeting. In today’s post we will discuss how the Knowledge & Learning module of the Preliminary Specification provides a solution for the high costs associated with field operations. Quotations for this post are from Professor Richard Langlois “Capabilities and Governance: the Rebirth of Production in the Theory of Economic Organization.”

We have with the Knowledge & Learning module a number of other tools that are part of the Preliminary Specification. Specifically the Military Command & Control Metaphor (MCCM) that enables a Joint Operating Committee to impose a chain of command over a multi-organizational group of people during the course of one of these field operations. These operations of course will include members of the Joint Operating Committees participating producers as well as the employees and contractors of the service industry representatives. Having them configured in a manner in which the chain of command is recognizable immediately. Secondly there is in the Preliminary Specification the Job Order system that provides a means in which to execute the operational order with the chain of command during the field operation. These two systems provide a tight control over the entire operation. Simply no action is taken without the authorized Job Order being issued.

This tight operational control seems to contradict the free markets that we have been pursuing in the service industry. I disagree. Having tight operational control has nothing to do with free markets, and free markets have nothing to do with tight operational control. They are two separate and distinct “things” that do not affect one another. Recall that the AFE and Job Order are provided through the “Planning & Control Interface” which bring in the capabilities from the “Dynamic Capabilities Interface” that the Joint Operating Committee has decided to implement. These capabilities include the information necessary for the people to conduct the work for the operation to be a success.

[I]t seems to me that we cannot hope to construct an adequate theory of industrial organization and in particular to answer our question about the division of labour between firm and market, unless the elements of organization, knowledge, experience and skills are brought back to the foreground of our vision (Richardson 1972, p. 888).

What we are implying with this level of operational control is that the Joint Operating Committee representatives, the earth scientists and engineers are in complete and total control of the field operation down to the water hauling driver. In a literal sense, yes, but I think you know the extent of the control that is implied with the MCCM and Job Order system. There is a command structure. Everything is documented. This level of coordination is provided as a means to offset the detail necessary for the science basis of the business to take precedence.

As we will argue in more detail below, there are in fact two principal theoretical avenues closed off by a conception of organization as the solution to a problem of incentive alignment. And both have to do with the question of production knowledge. One is the possibility that knowledge about how to produce is imperfect - or, as we would prefer to say, dispersed, bounded, sticky and idiosyncratic. The second is the possibility that knowledge about how to link together one person's (or organization's) productive knowledge with that of another is also imperfect. The first possibility leads us to the issue of capabilities or competencies; the second leads to the issue of qualitative coordination". p. 11

What Professor Langlois is implying here is that the converse of “incentive alignment” is “qualitative coordination”. The high costs associated with the service industry to do their job is in order to motivate the people and the capital to work in the industry. If we were able to better coordinate, in the manner that the Knowledge & Learning module suggests, the issues of costs and quality would be mitigated.

A close reading of this passage suggests that Coase's explanation for the emergence of the firm is ultimately a coordination one: the firm is an institution that lowers the costs of qualitative coordination in a world of uncertainty. p. 11

By using the Joint Operating Committee we are eliminating the use of the bureaucracy. However as the previous quote implies the bureaucracy (or firm) lowered the cost of qualitative coordination in a world of uncertainty, albeit poorly in our case, it is therefore necessary that we replicate that coordination in the Joint Operating Committee.

More generally, we are worried that conceptualizing all problems of economic organization as problems of aligning incentives not only misrepresents important phenomena but also hinders understanding other phenomena, such as the role of production costs in determining the boundaries of the firm. As we will argue, in fact, it may well pay off intellectually to pursue a research strategy that is essentially the flip-side of the coin, namely to assume that all incentive problems can be eliminated by assumption and concentrate on coordination (including communication) and production cost issues only.

By coordinating the field operations in the manner that is proposed in the Knowledge & Learning module of the Preliminary Specification we can eliminate the incentive problem and increase the control over the implementation of the science basis of the business. All with maintaining free and open markets for which the innovation in the service industry to develop.

For the industry to successfully provide for the consumers energy demands, it’s necessary to build the systems that identify and support the Joint Operating Committee. Building the Preliminary Specification is the focus of People, Ideas & Objects. Producers are encouraged to contact me in order to support our Revenue Model and begin their participation in these communities. Those individuals that are interested in joining People, Ideas & Objects can join me here and begin building the software necessary for the successful and innovative oil and gas industry.

Please note what Google+ provides us is the opportunity to prove that People, Ideas & Objects are committed to developing this community. That this is user developed software, not change that is driven from the top down. Join me on the People, Ideas & Objects Google+ Circle (private circle, accessible by members only) and begin building the community for the development of the Preliminary Specification.

The Preliminary Specification Part CCXLIII (K&L Part XVI)

The first thing we need to note is that in reviewing Professor Richard Langlois’ material for the Knowledge & Learning module there will be a significant amounts of overlap with the Research & Capabilities module. The two modules are very close in functionality with only the perspectives being different between the producer firm and the Joint Operating Committee. In order to ensure that we capture the pertinent information in the Knowledge & Learning module it will be as if the Research & Capabilities module hasn’t been written so the duplication will be high, but I think everyone will understand why.

Our first paper of Professor Langlois’ is “Capabilities and Governance: the Rebirth of Production in the Theory of Economic Organization.” In this paper he introduces capabilities as a new theory of economic organization. Its primary concern, as it is here in the Knowledge & Learning module, is its focus on production.

However, a new approach to economic organization, here called "the capabilities approach," that places production centre stage in the explanation of economic organization, is now emerging. We discuss the sources of this approach and its relation to the mainstream economics of organization. p. 1

The capabilities approach picks up and builds on the transaction cost approach that we have been discussing throughout the Preliminary Specification. It also builds on the boundary of the firm and markets.

One of our important goals here is to bring the capabilities view more centrally in the ken of economics. We offer it not as a finely honed theory but as a developing area of research whose potential remains relatively untapped. Moreover, we present the capabilities view not as an alternative to the transaction-cost approach but as complementary area of research p. 7.

To build the capabilities of the oil and gas producer to conduct their own field operations is impractical and inefficient. Sourcing the field operations needs of the producer from the service industry is the only viable solution. Deployment of those capabilities becomes the issue in the innovative oil and gas industry. Particularly when the basis of competitive differentiation is on the earth science and engineering principles the oil and gas business is based. “What” and “how” those capabilities are developed and deployed are critical elements of the oil and gas producers competitive differentiation. The Research & Capabilities and Knowledge & Learning modules of the Preliminary Specification organize these capabilities in a manner where innovation is the priority.

Seldom if ever have economists of organization considered that knowledge may be imperfect in the realm of production, and that institutional forms may play the role not (only) of constraining unproductive rent seeking behaviour but (also) of creating the possibilities for productive rent-seeking behaviour in the first place. To put it another way, economists have neglected the benefit side of alternative organizational structures; for reason of history and technique, they have allocated most of their resources to the cost side. p. 6

Using the Joint Operating Committee as the key organizational construct of the innovative oil and gas producer is the first step to this innovative setting. The Knowledge & Learning module is a Joint Operating Committee focused module. There the participants in the JOC are able to review the capabilities of the various firms that are members of the JOC. Enabling them to make the operational decisions based on the right information at the right time with the right people.

In sum, whether we see it from the perspective of the capabilities perspective or from the perspective of the modern economics of organization, there is an exciting theoretical frontier ahead. p. 31

For the industry to successfully provide for the consumers energy demands, it’s necessary to build the systems that identify and support the Joint Operating Committee. Building the Preliminary Specification is the focus of People, Ideas & Objects. Producers are encouraged to contact me in order to support our Revenue Model and begin their participation in these communities. Those individuals that are interested in joining People, Ideas & Objects can join me here and begin building the software necessary for the successful and innovative oil and gas industry.

Please note what Google+ provides us is the opportunity to prove that People, Ideas & Objects are committed to developing this community. That this is user developed software, not change that is driven from the top down. Join me on the People, Ideas & Objects Google+ Circle (private circle, accessible by members only) and begin building the community for the development of the Preliminary Specification.

The Preliminary Specification Part CCXLII (K&L Part XV)

We return now to the Knowledge & Learning module of the Preliminary Specification. This modules focus is on the Joint Operating Committee and has a variety of interfaces included. Such as the Dynamic Capabilities Interface, Planning & Deployment Interface, Lessons Learned
Interface, a Wiki Styled Information Repository, and the Revenue Per Employee detailed by Joint Operating Committee. We recently noted in the Research & Capabilities module that the Planning & Deployment Interface also included elements of the AFE and Job Order functionality within that interface.

Within the Joint Operating Committee we have information, primarily the capabilities, of the participating producers being provided through the “Dynamic Capabilities Interface”. Each of these capabilities have been developed and are available to the Joint Operating Committee if they should decide to use them. Operational control resides with the Joint Operating Committee and the People, Ideas & Objects Research & Capabilities and Knowledge & Learning modules are moving the knowledge to where the decision rights reside. Making the appropriate decision in the appropriate time frame, based on the appropriate information is the key to the successful and innovative oil and gas producer. Hoarding of information so that it is not susceptible to competitive leakage is secondary to the primary concern of getting the right information to the right people at the right time.

There is a distinct division of labor between the Research & Capabilities and the Knowledge & Learning modules. Issues and opportunities are resolved in the Research & Capabilities module. To expect that each individual JOC would deal with these greater issues would be unproductive and disorganized. Particularly when you have the capabilities being populated from multiple producers. The capabilities that are listed in the “Dynamic Capabilities Interface” must be ready for prime time to ensure they do not unnecessarily burden each and every Joint Operating Committee. By dealing and resolving with these points, and codifying them in the Dynamic Capabilities Interface the producer firm is publishing the appropriate information to the JOC at the appropriate time. Then the JOC has to only deal with the resolved issues and opportunities of the property and none of the noise that may or may not be arguing for attention.

In reviewing the information in the Knowledge & Learning module so far I wanted to highlight a few points. The domain of the Joint Operating Committee is; “the ability to innovate will not only permit the oil and gas producer to find more oil and gas, increase the production of oil and gas from the field, but will also provide innovative ways in which to deploy its capital and reduce its costs.” Which seems to capture the whole point of the exercise.

Lastly I wanted to point out the value of the football analogy that we have been using. We’ve all seen the football coach on the sidelines with the list of hundreds of plays that can be called during the game. Selection of the appropriate play will help to move the team towards its goal of winning the game. To be presented with a list of hundreds of “capabilities” within a Joint Operating Committee has probably been the case for many in the industry. The ability to select and execute a “capability” in the manner that the football coach is able to, and have them communicated to the team members for execution in the half second that it takes is the rarity. There is no reason why each and every Joint Operating Committee should not have this type of efficiency in the ability to select and execute the capabilities that are made available to them. With the Knowledge & Learning module of the Preliminary Specification this efficiency would be provided.

For the industry to successfully provide for the consumers energy demands, it’s necessary to build the systems that identify and support the Joint Operating Committee. Building the Preliminary Specification is the focus of People, Ideas & Objects. Producers are encouraged to contact me in order to support our Revenue Model and begin their participation in these communities. Those individuals that are interested in joining People, Ideas & Objects can join me here and begin building the software necessary for the successful and innovative oil and gas industry.

Please note what Google+ provides us is the opportunity to prove that People, Ideas & Objects are committed to developing this community. That this is user developed software, not change that is driven from the top down. Join me on the People, Ideas & Objects Google+ Circle (private circle, accessible by members only) and begin building the community for the development of the Preliminary Specification.