The Preliminary Specification Part CXLVI (K&L Part XIV)

In both the Knowledge & Learning and Research & Capabilities modules producers are benefiting from something that may not be too obvious on the surface. That is the objective nature of the People, Ideas & Objects Preliminary Specification and the fact that it is not affiliated with any one specific producer. That is to say it is not an application that grew out of Exxon Mobil, BP or Shell and was used there first. It will be an application that was independently supported through the Revenue Model and will remain unbiased as to which producers perspective it takes. The same can be said for the Community of Independent Service Providers. This may mean more to some producers then others, however, from an innovation point of view it will also mean a few things.

People, Ideas & Objects is focused on providing the innovative oil and gas producer with ERP systems based on using the Joint Operating Committee as the key organizational construct. By having a software development capability present while working within the Knowledge & Learning module, the innovative producer will be able to deal with the many new possibilities in their business. The software that an organization uses is a “technology paradigm” that the oil and gas industry has to consider. And software puts the industry on a new “trajectory” just as we have discussed here for the earth science and engineering disciplines. Professor Giovanni Dosi notes.

• First, new technological paradigms have continuously brought forward new opportunities for product development and productivity increases. p. 1138
• Secondly “A rather uniform, characteristic of the observed technological trajectories is their wide scope for mechanization, specialization and division of labor within and among plants and industries.” p. 1138

Which speaks to the attributes of software. However, would these technological paradigms and trajectories be available to the producer community if the software was owned and operated by Exxon Mobil or Shell. What motivation would they have in making the changes to the software to accommodate your business? The third party, objective nature of People, Ideas & Objects and the Community of Independent Service Providers is necessary for the software to become amenable to the needs of its user communities. If the producer is to rely on this third paradigm and trajectory as a key advancement in their business, then it must remain open to the needs of the community. Professor Dosi notes.

Similarly, new technological paradigms, directly and indirectly -- via their effects on “old” ones -- generally prevent the establishment of decreasing returns in the search process for innovations. p. 1138

Let me restate this for clarity, the indirect nature of ERP software via its effect on the earth science and engineering disciplines, will generally prevent the establishment of decreasing returns in the search process for innovations.

Review of the Preliminary Specification to this point shows how different it is from any other ERP system. It is designed around the Joint Operating Committee, the innovative oil and gas producer and will include the user community in determining its precise needs. This is the type of application that is needed for the 21st century oil and gas producer. A vision that focuses the people who work within the industry on the activities that people do best. Collaborating, researching, evaluating and deciding. And leaves the computers to do the things that they do the best. A software development capability designed to provide the innovative oil and gas producer with the means to all of their ERP software needs. Tomorrow we will begin our innovation review of the Performance Evaluation and Analytics & Statistics modules.

For the industry to successfully provide for the consumers energy demands, it’s necessary to build the systems that identify and support the Joint Operating Committee. Building the Preliminary Specification is the focus of People, Ideas & Objects. Producers are encouraged to contact me in order to support our Revenue Model and begin their participation in these communities. Those individuals that are interested in joining People, Ideas & Objects can join me here and begin building the software necessary for the successful and innovative oil and gas industry.

Please note what Google+ provides us is the opportunity to prove that People, Ideas & Objects are committed to developing this community. That this is user developed software, not change that is driven from the top down. Join me on the People, Ideas & Objects Google+ Circle and begin building the community for the development of the Preliminary Specification. 

The Preliminary Specification Part CXLV (K&L Part XIII)

Yesterday’s post drew the analogy of a football coach who reviews his list of plays, selects one, and calls it for the team to execute, to the “Planning & Deployment Interface” of the Knowledge & Learning module. The ability for a Joint Operating Committee to have this style of communication and understanding of what needs to be conducted, may be necessary in the very near future. With the insatiable demands for energy, and the ever increasing demands of earth science and engineering work needed with each barrel of oil and gas produced, the amount of work required for the JOC will need to be conducted in a highly organized and controlled manner.

Adding to this level of increased work load the Joint Operating Committee is subjected to the real demands of the expanding earth science and engineering frontiers. In addition the field and service industries are going through their own innovative cycles. The problem is that if each Joint Operating Committee is left to deal with each of these issues on there own, then there will be significant time and energy wasted on pursuing “things” that may or may not bear fruit for the property. This is something that needs to be avoided. However, the JOC needs to be deploying the latest state of the art proven technology in the most capable manner.

If we look over the past many blog posts of the Research & Capabilities and Knowledge & Learning module we can see how these “things” are filtered out and dealt with. The Joint Operating Committee is being provided with the most up to date capabilities from the producer firms that have a financial interest in the property. It is those producers that are expending the research to expand their understanding of the earth science and engineering on behalf of all of their interests in all of their JOC’s. Taking the trips down the blind bunny trails once and only once on behalf of all the JOC’s. Not having each and every JOC discovery the blind bunny trail on their own. Then developing the capability to the level necessary for the inclusion in the “Capabilities Interface” where it will be used successfully by all of the JOC’s they have an interest in.

This process helps the Joint Operating Committee to focus on the property. To eliminate the noise of what is going on in the larger oil and gas arena for the moment and deploy the innovations that are known to add value. It is as when the coach calls the play the only concern is to ensure that you execute your part of the play in the manner that it is designed. There may be times back on the practice field to fiddle with some changes, but for now its time to run the play as it was designed. This is the business of the “Planning & Deployment Interface” in the Knowledge & Learning module.

Professor Giovanni Dosi asserts that much of the innovativeness of a firm is dependent on technology more than science, and is based on several implications. The first implication being the net benefactor of the cumulativeness, tacitness and technological knowledge implies that “innovation and the capabilities for pursuing them are to an extent local and firm specific.” Secondly, the “opportunity for technological advances in any one economic activity can also be expected to, and constrained by, the characteristics of each technological paradigm and its degree of maturity”. This is further defined by the technological and scientific capabilities, and “the advances made by suppliers and customers.” (p. 1137)

These implications that Professor Dosi notes are reflected in the processes managed in the Research & Capabilities and Knowledge & Learning modules. The Knowledge & Learning module enabling the Joint Operating Committee to implement the “innovation and the capabilities for pursuing them are to an extent local and firm specific.” With the Research & Capabilities module providing the future with the “opportunity for technological advances in any one economic activity can also be expected to, and constrained by, the characteristics of each technological paradigm and its degree of maturity”. Providing the producer with the best of both worlds.

For the industry to successfully provide for the consumers energy demands, it’s necessary to build the systems that identify and support the Joint Operating Committee. Building the Preliminary Specification is the focus of People, Ideas & Objects. Producers are encouraged to contact me in order to support our Revenue Model and begin their participation in these communities. Those individuals that are interested in joining People, Ideas & Objects can join me here and begin building the software necessary for the successful and innovative oil and gas industry.

Please note what Google+ provides us is the opportunity to prove that People, Ideas & Objects are committed to developing this community. That this is user developed software, not change that is driven from the top down. Join me on the People, Ideas & Objects Google+ Circle and begin building the community for the development of the Preliminary Specification. 

The Preliminary Specification Part CXLIV (K&L Part XII)

In our last two posts of the Knowledge & Learning module of the Preliminary Specification. We have discussed the factor of revenue per employee, and the “Capabilities Interface” that is populated with the capabilities of the producers who are part of the Joint Operating Committee. In today’s post we put these two points together. And provide a key point of how the Joint Operating Committee becomes the framework for innovation.

It is important to recall that innovation is not research. Research is being conducted in the Research & Capabilities module and when the research is proven, added to the “Capabilities Interface” which in turn is populated to the Knowledge & Learning module. We have also drawn the football analogy to how the development and execution of capabilities in the producer firm and Joint Operating Committees are similar to the way that football teams plays are developed and executed. Today we want to use the analogy of the coach who is motivated to win, selects the plays from a long list of plays of what the team can execute.

Professor Giovanni Dosi states that profit motivated agents must involve both “the perception of some sort of opportunity and an effective set of incentives.” (p. 1135) Professor Dosi introduces the theory of Schmookler (1966) and asked “are the observed inter-sectoral differences in innovative investment the outcome of different incentive structures, different opportunities or both”? (p. 1135) Schmookler believed in differing degrees of economic activity derived from the same innovate inputs. For the purposes of this post the perception of some sort of opportunity is realized through the members of the Joint Operating Committee reviewing the capabilities that are presented to them through the Knowledge & Learning module. The listing of capabilities presented from the various producers that are participants in the Joint Operating Committee would provide a depth of opportunity that was previously unqualified and unquantified. The incentives would be performance based and focused around the possibility of increasing the trajectory of revenue per employee.

We’ve all seen the coach on the sidelines with the list of hundreds of plays that can be called during the game. Selection of the appropriate play will help to move the team towards its goal of winning the game. To be presented with a list of hundreds of opportunities within a Joint Operating Committee has probably been the case for many in the industry. The ability to select and execute them in the manner that the coach is able to, and have them communicated to the team members for execution in the half second that it takes is the rarity. There is no reason for each and every Joint Operating Committee to not have this type of efficiency in the ability to select and execute the capabilities that are made available to them.

As in the Research & Capabilities module, the Knowledge & Learning module has a “Planning & Deployment Interface”. Within this interface the user is able to select the capabilities they want to deploy from the “Capabilities Interface” and resource it from the Military Command & Control Metaphor. Since the capabilities are listed from various firms in the Joint Operating Committees special considerations may need to be made in terms of the resource requirements. The “capabilities” that are selected are for company x, and available for company x, not necessarily for Joint Operating Committee xyz without the involvement of x. Therefore special arrangements to augment the Joint Operating Committee with resources from company x will most probably be required. From there the execution of the capabilities can take place.

For the industry to successfully provide for the consumers energy demands, it’s necessary to build the systems that identify and support the Joint Operating Committee. Building the Preliminary Specification is the focus of People, Ideas & Objects. Producers are encouraged to contact me in order to support our Revenue Model and begin their participation in these communities. Those individuals that are interested in joining People, Ideas & Objects can join me here and begin building the software necessary for the successful and innovative oil and gas industry.

Please note what Google+ provides us is the opportunity to prove that People, Ideas & Objects are committed to developing this community. That this is user developed software, not change that is driven from the top down. Join me on the People, Ideas & Objects Google+ Circle and begin building the community for the development of the Preliminary Specification. 

The Preliminary Specification Part CXLIII (K&L Part XI)

One of the advantages of writing the Preliminary Specification in the manner that we are is that you can aggregate the posts for one module by selecting its label. If you have an interest in working only on the Knowledge & Learning module then you can eliminate the other posts by just simply selecting the Knowledge-Learning label on this blog or from here. The disadvantage is that we are repeating ourselves in some cases so that the people who are focusing on one module are picking up all the pertinent information for that module. I would recommend that everyone read all the posts for all the modules as there is significant interactions between the modules, and we may not be able to catch all the pertinent detail that should be included in each module.

Today’s post discusses the risks of proprietary leakage of data or information as a result of the “Capabilities Interface” being populated with the capabilities information from each of the producers who are participants in the Joint Operating Committee.

We have all seen how information or secrets within the industry can travel from one firm to another at a rather rapid pace. No one should be surprised to learn that what they thought was confidential to the firm, was somehow leaked and became well known throughout the industry. It is some times more difficult to communicate information through the organization then it is to get information across the industry. The question therefore becomes how is proprietary information, and more importantly these proprietary capabilities that are available within the producer firms, deployed on an as needed basis within the various Joint Operating Committees.

Professor Dosi notes that although the free movement of information has occurred in industries for many years, yet has never been easily transferable to other companies within those industries. The ability to replicate a competitive advantage from one company to another is not as easy, and may indeed be not worthwhile doing. Dosi (1988) goes one step further and states, “even with technology license agreements, they do not stand as an all or nothing substitute for in house search.” A firm needs to develop “substantial in-house capacity in order to recognize, evaluate, negotiate and finally adapt the technology potentially available from others.”

Within the Knowledge & Learning module we are operating within the Joint Operating Committee. Populated with the capabilities from each of the participating producers through the “Capabilities Interface”. It may be a concern to some producers that the publication of these capabilities to other producers representatives in the Joint Operating Committee would lead to leakage of proprietary information or loss of knowledge or capabilities. That may be, however the nature of capabilities are such that they can’t be copied by a simple matter of recording the text. As we have discussed elsewhere, the development of capabilities is the results of research and application of the resources of the firm in a determined and purposeful manner to achieve an outcome. Copying the plans or instructions would not provide you with the means to achieve the objective.

If it is determined that the “Capabilities Interface” in the Knowledge & Learning module only provides a summary description of the capability, as opposed to publishing the entire capability in the Joint Operating Committee, then if selected it would be assumed that that producers staff would undertake to complete the task. That may be the ultimate solution to the concern for the loss of proprietary information, knowledge or capabilities. What we have to make sure that we don’t lose is the ability to deploy the right information, knowledge or capability at the right time and at the right place. Information’s shelf life expires faster each day. Knowledge, information and capabilities need to be employed and deployed when and where they are needed and required.

For the industry to successfully provide for the consumers energy demands, it’s necessary to build the systems that identify and support the Joint Operating Committee. Building the Preliminary Specification is the focus of People, Ideas & Objects. Producers are encouraged to contact me in order to support our Revenue Model and begin their participation in these communities. Those individuals that are interested in joining People, Ideas & Objects can join me here and begin building the software necessary for the successful and innovative oil and gas industry.

Please note what Google+ provides us is the opportunity to prove that People, Ideas & Objects are committed to developing this community. That this is user developed software, not change that is driven from the top down. Join me on the People, Ideas & Objects Google+ Circle and begin building the community for the development of the Preliminary Specification. 

The Preliminary Specification Part CXLII (K&L Part X)

In today’s post we want to talk about the publication of the specific Joint Operating Committee calculations of Revenue Per Employee, and particularly the trajectory that the factor is on. How this calculation could affect those that work within the property; and the use of the information contained within the Knowledge & Learning module of the Preliminary Specification.

First of all it is understood that not all people are necessarily assigned to work for one Joint Operating Committee. There are times when people might be assigned to dozens during the course of one month. Calculating the hours worked by the people within the Joint Operating Committee from the different companies is not going to be a difficulty for the People, Ideas & Objects software. With the Military Command & Control Metaphor the time and tasks that each individual will be doing is being recorded for these information purposes. Although most will only work part-time on a JOC, the factor will be converted on a full-time equivalent basis. Calculations of revenue for the property should be straight forward.

In previous posts we had discussed the calculation of a comparison of the factor of revenue per employee from one period of time to the other. These trajectories were the real key in determining where the factors were heading. Was the property accelerating its innovativeness, or decelerating. We also broke down the trajectory into three different types of variances. The volume variance, price variance, and employee # variance. Each of these variances reflecting the reason why the trajectory might have changed. All of these variables should be shown on their own “Revenue Per Employee” interface within the Joint Operating Committee. Each member that is assigned to the property should have access to this page and be able to contribute ideas and suggestions on how to improve the factor. An open collaboration focused on revenue per employee. In addition, this page could have a historical context of many time periods captured in a graphical format. Showing over the past many years how the revenue per employee at that Joint Operating Committee has performed.

A few days ago we also learned that revenue per employee reflects the asymmetry of the assets within the industry. That asymmetry would be very apparent in a comparison of Joint Operating Committees. We would see large variances in revenue per employee between Joint Operating Committees. And I am not suggesting that the comparisons are valid, just pointing out that the industry has a large asymmetry in their competitive makeup. The comparison of revenue per employee for the same property over time, I think, will have a significant impact on the people that work for that Joint Operating Committee.

One certain way to increase the factor of revenue per employee would be to fire all the employees. However, the best way to deal with the factor is described by Professor Giovanni Dosi when he states “In very general terms, technological innovation involves or is the solution to problems.” Dosi goes on to further define this as “In other words, an innovative solution to a certain problem involves “discovery” (of the problem) and “creation” since no general algorithm can be derived from the information about the problems. Solutions to technological problems involve the use of information derived from experience and formal knowledge. It is the specific and un-codified capabilities, or tacit-ness” as Professor Dosi describes “on the part of the inventors who discover the creative solution.”

Members of the Joint Operating Committee would be able to turn to the “Capabilities Interface” which contains the capabilities of the producer firms that are part of the partnership. There the people would be able to see what the firms offered in terms of their earth science and engineering problem solving solutions. It may then be realized that applying some formerly unknown capability to the situation in the JOC will yield greater productivity... or something like that.

For the industry to successfully provide for the consumers energy demands, it’s necessary to build the systems that identify and support the Joint Operating Committee. Building the Preliminary Specification is the focus of People, Ideas & Objects. Producers are encouraged to contact me in order to support our Revenue Model and begin their participation in these communities. Those individuals that are interested in joining People, Ideas & Objects can join me here and begin building the software necessary for the successful and innovative oil and gas industry.

Please note what Google+ provides us is the opportunity to prove that People, Ideas & Objects are committed to developing this community. That this is user developed software, not change that is driven from the top down. Join me on the People, Ideas & Objects Google+ Circle and begin building the community for the development of the Preliminary Specification. 

The Preliminary Specification Part CXLI (K&L Part IX)

One of the first items that we address in this pass of the Knowledge & Learning module of the Preliminary Specification. Is how the items within the various “Capabilities Interfaces” of the many producers who are participants in the Joint Operating Committee are populated into the Knowledge & Learning module. As we have discussed each producer publishes the pertinent capabilities they have to the various Joint Operating Committees. Therefore the people who are working within the JOC are presented with a variety of capabilities that may be duplications and similar to others. That would be reasonable to expect. However, just as the football teams playbook may have similar looking plays, they may have subtle differences in the manner in which they are executed, etc. That would be the same case in the Knowledge & Learning module.

It would also be the case that company A who is a member of the Joint Operating Committee have developed a capability for XYZ operation that is considered state of the art in the industry. This capability is one of several capabilities that are listed in the Knowledge & Learning modules Capabilities Interface for XYZ operation. However, the Joint Operating Committee has operational decision making authority, and it is decided to execute the capability of company B for XYZ operation through the Knowledge & Learnings "Planning & Deployment Interface" instead. The JOC is the authority who have the choice as to how the day to day operations are implemented. Their motivation is based on performance, based on the Performance Evaluation module and they are most familiar with the property. In the football analogy this would be the quarterback calling an audible.

As technical paradigms are introduced, Joint Operating Committees will accept and use these innovative capabilities at different rates. This rate of acceptance can be classified as early innovators, imitators and fence sitters. Thus a satisfactory understanding of the relationship between innovation and distribution of JOC’s structural and performance characteristics implies an analysis of the learning and competitive process through which an industry changes. Professor Giovanni Dosi notes these behavioral attributes.

Finally, empirical studies often show the coexistence, within the same industry and for identical environmental incentives, of widely different strategies related to innovation, pricing, R & D, investment and so on. Specifically with regard to innovation one notices a range of strategies concerning whether or not to undertake R & D; being an inventor or an early imitator, or “wait and see”; the amount of investment in R & D; the choice between “incremental; and risky projects, and so on (see Charles Carter and Bruce Williams 1957; Freeman 1982 and the bibliography cited therein). Call these differences behavioral diversity. p. 1157

We have also seen over the past twenty years an interesting trend that has created significant differences in the stratification of the oil and gas industry in terms of the size of the producer and their associated innovativeness. The small organization was able to purchase reserves and facilities from the open market, or their previous owners, only to substantially increase the inherent value through increased production and / or performance. We can conclude that the bureaucracy inherent in the hierarchy had stifled the innovativeness in the larger organizations and most disturbing is the lack of concern or identification of this as an issue over the past number of decades.

With this structure and arrangement between the Research & Capabilities and Knowledge & Learning modules, focused around the Joint Operating Committee, replicating the small oil and gas producer and focused on performance. The probability that the lumbering bureaucracy has been defeated is significant.

For the industry to successfully provide for the consumers energy demands, it’s necessary to build the systems that identify and support the Joint Operating Committee. Building the Preliminary Specification is the focus of People, Ideas & Objects. Producers are encouraged to contact me in order to support our Revenue Model and begin their participation in these communities. Those individuals that are interested in joining People, Ideas & Objects can join me here and begin building the software necessary for the successful and innovative oil and gas industry.

Please note what Google+ provides us is the opportunity to prove that People, Ideas & Objects are committed to developing this community. That this is user developed software, not change that is driven from the top down. Join me on the People, Ideas & Objects Google+ Circle and begin building the community for the development of the Preliminary Specification.

The Preliminary Specification Part CXL (K&L Part VIII)

We now start our third pass through the Knowledge & Learning module. This will provide a focus on Professor Giovanni Dosi’s 1988 paper “Sources, Procedures and Microeconomic Effects of Innovation”. We also metaphorically move from the “practice field” of the Research & Capabilities module to “game day” with our football analogy in this the Knowledge & Learning module. In reviewing what has been written so far in the Preliminary Specification I was interested in this comment. The domain of the Joint Operating Committee is; “the ability to innovate will not only permit the oil and gas producer to find more oil and gas, increase the production of oil and gas from the field, but will also provide innovative ways in which to deploy its capital and reduce its costs.” Which seems to capture the point of the exercise.

What we have in the Knowledge & Learning module is three interfaces developed so far. The first is the “Capabilities Interface” which is the published version of each of the producer firms capabilities that are part of the Joint Operating Committee. These interfaces are sorted based on geological zone, and other criteria, and published based on those criteria. Therefore each Joint Operating Committee receives access to the capabilities that are pertinent to that JOC from each producer. There is also a “Wiki Styled Information Repository” that includes the policies, procedures, operational and management information for the property. This area would also include what is commonly referred to as the well file in terms of the information that is contained with in it. Lastly there is the “Lessons Learned” interface where the people who work within the JOC record the information on the operations that did not follow the expected outcomes.

What we have learned from Professor Giovanni Dosi is comprehensive in terms of innovation. To capture these elements of innovation within the modules of the People, Ideas & Objects Preliminary Specification builds real value for the innovative oil and gas producers. To briefly summarize some of what we learned, primarily in the Research & Capabilities module, which is directly pertinent to the Knowledge & Learning module, is as follows.

Lets review the three key factors of innovation Professor Dosi notes:

The search, development and adoption of new processes and products in market economies are the outcome of the interaction between:

• Capabilities and stimuli generated with each firm and within the industry of which they complete.

and

• Broader causes external to the individual industries, such as the state of science in different branches, the facilities for the communication of knowledge, the supply of technical capabilities, skills, engineers etc.

Additional issues include the conditions controlling occupational and geographical mobility and or consumer promptness / resistance to change, market conditions, financial facilities and capabilities and the criteria used to allocate funds. Microeconomic trends in the effects on changes in relative prices of inputs and outputs, including public policy. (regulation, tax codes, patent and trademark laws and public procurement.)

Recall that these key factors are being funneled through the Research & Capabilities “Research Budget Allocation Interface” and “Capabilities Interface”. It is there that the greater issues of the science, the capabilities, microeconomic trends and public policy can be centralized and dealt with on behalf of all of the Joint Operating Committees that the producer may have an interest in. To expect that each individual JOC would deal with these greater issues would be unproductive and disorganized. By dealing with these points, and codifying them in the Capabilities Interface the producer firm is publishing the appropriate information to the JOC at the appropriate time. Then the JOC has to only deal with the issues and opportunities of the property and none of the noise that may or may not be arguing for attention.

For the industry to successfully provide for the consumers energy demands, it’s necessary to build the systems that identify and support the Joint Operating Committee. Building the Preliminary Specification is the focus of People, Ideas & Objects. Producers are encouraged to contact me in order to support our Revenue Model and begin their participation in these communities. Those individuals that are interested in joining People, Ideas & Objects can join me here and begin building the software necessary for the successful and innovative oil and gas industry.

Please note what Google+ provides us is the opportunity to prove that People, Ideas & Objects are committed to developing this community. That this is user developed software, not change that is driven from the top down. Join me on the People, Ideas & Objects Google+ Circle and begin building the community for the development of the Preliminary Specification. 

The Preliminary Specification Part CXXXIX (R&C Part XXXIV)

In this the last post of the third, or innovation pass through the Research & Capabilities module of the Preliminary Specification. We get to soar with the eagles as we apply the over arching scope of the application of innovation to the oil and gas producer. Today’s post takes the summary of Professor Giovanni Dosi’s research and applies it to the oil and gas industry. To show the potential of what would be the effect of developing the People, Ideas & Objects ERP software.

In this post Professor Giovanni Dosi asserts that the makeup of industries and companies is attributable not only to the endogenous force of competition. Innovation and imitation also make up the fundamental structure of an industry. “Market structure and technological performance are endogenously generated by three underlying sets of determinants.”

Each of the following three components is evident in the marketplace of an oil and gas producer today, as reflected in:

• The structure of demand.

Satisfying the insatiable demand of the global energy marketplace is critical to the advancement of all societies. American and western as well as Chinese and developing societies face real challenges in sourcing adequate long term sources of energy. The long term demands on the energy producer have never been so great.

• The nature and strength of opportunities for technological advancement.

The nature and opportunities for technological advancement lead one to believe mankind has never faced the level of opportunity and acceleration that is possible today. The industrial mechanization of the past 100 years combined with the prospective mechanization of intellectual pursuits combine to markedly appreciate the value of human life. The availability of energy will be a critical element of this advancement.

• The ability of firms to appropriate the returns from private investment in research and development.

The oil and gas industry is moving closer to its earth science and engineering principles. Innovation, research and development in both the producer firm and the market are and will become more commercial in nature. It is on the basis of success or failure of these factors that will determine the success or failure of the firm within the industry.

By codifying the earth science and engineering capabilities within the “Capabilities Interface” the producer begins the process of documenting what it is capable of achieving. By using the “Planning & Deployment Interface” either through the Research & Capabilities or Knowledge & Learning module, the producer will be able to deploy those capabilities with the resources they have developed. We have drawn the analogy of a football team and how they design and communicate plays as to how these modules will work in the People, Ideas & Objects Preliminary Specification. But at the same time the overall process of innovation is working within the background. The research and development is being conducted and the innovation is being deployed. Tomorrow we will begin our third pass through the Knowledge & Learning module.

For the industry to successfully provide for the consumers energy demands, it’s necessary to build the systems that identify and support the Joint Operating Committee. Building the Preliminary Specification is the focus of People, Ideas & Objects. Producers are encouraged to contact me in order to support our Revenue Model and begin their participation in these communities. Those individuals that are interested in joining People, Ideas & Objects can join me here and begin building the software necessary for the successful and innovative oil and gas industry.

Please note what Google+ provides us is the opportunity to prove that People, Ideas & Objects are committed to developing this community. That this is user developed software, not change that is driven from the top down. Join me on the People, Ideas & Objects Google+ Circle and begin building the community for the development of the Preliminary Specification. 

The Preliminary Specification Part CXXXVIII (R&C Part XXXIII)

One element that we have not discussed in our review of the Research & Capabilities module is the factor of revenue per employee. We are not using the factor anywhere in any of the interfaces, I am only highlighting it here today to show how the Research & Capabilities module influences the elements that make up the calculation of revenue per employee. Recall in the other modules that there are large variances in the factor between producers. These variances show that there is a large asymmetry between the innovativeness of the producers. It is this asymmetry that is the topic of today’s post.

It was through the review of Professor Giovanni Dosi’s paper “Sources, Procedures & Microeconomic Effects of Innovation” that we learned of the asymmetry effect. That each successful innovation creates an asymmetry effect, or an overall increase in competitive position of the entire industry. However, that does not necessarily increase the competitiveness of all the participants of the industry. The ability of laggard companies to improve their competitive position helps to form new positions within their industries. These laggard companies are generally able to move further and quicker through their imitation of leading companies. However, the primary differentiating component of competition based on innovation is attributable to the innovative capability of the firm.  ie. a laggard will remain a laggard without the direct and active development of innovative appropriability conditions.

Professor Dosi finds these points difficult to quantify and prove, but states these may be tacitly understood. People, Ideas & Objects asserts that that was the case in 1988 at the time this article was written, however, the laggards ability to “keep up” or even “catch up” may have progressively diminished through the application of information technology during the 2000’s.

There is a determining paradox for the ability to innovate based on imitation or on the basis of strict Research and Development. Companies can copy others innovations in industries with minimal asymmetry, (where competitors are all the same). Whereas industries that are asymmetric (like oil and gas) or have large variances in their capabilities are best served by differentiating themselves by pursuit of Research and Development.

This is why the focus on the capabilities is critical to the success of the oil and gas concern. They are able to differentiate themselves by research and development and the focusing on capabilities. Passing these capabilities on to the Joint Operating Committee through the Knowledge & Learning module allows the producer to initiate these capabilities “just in time” and where they are needed. This can be done without the concern that they are exposed or risked to potential competitors through the Joint Operating Committee. It should be clear through this analysis that those that would attempt to copy others capabilities will be expending extensive resources to do so, as much or even more then it would cost to develop the capabilities on their own, however, those that chose to copy will remain static within their competitive position within the industry. Its just not that easy to copy someone else, and its not that valuable to their firm. When markets such as oil and gas are asymmetric, Research & Development are the ways in which to differentiate capabilities and build an innovative oil and gas producer.

For the industry to successfully provide for the consumers energy demands, it’s necessary to build the systems that identify and support the Joint Operating Committee. Building the Preliminary Specification is the focus of People, Ideas & Objects. Producers are encouraged to contact me in order to support our Revenue Model and begin their participation in these communities. Those individuals that are interested in joining People, Ideas & Objects can join me here and begin building the software necessary for the successful and innovative oil and gas industry.

Please note what Google+ provides us is the opportunity to prove that People, Ideas & Objects are committed to developing this community. That this is user developed software, not change that is driven from the top down. Join me on the People, Ideas & Objects Google+ Circle and begin building the community for the development of the Preliminary Specification. 

The Preliminary Specification Part CXXXVII (R&C Part XXXII)

When we consider what a producers capabilities, those that are listed in the “Capabilities Interface” of the Research & Capabilities module of the Preliminary Specification, would look like. Much would depend on the type of the producer that is represented there. As one could imagine a large firm such as Exxon would have a vast library of capabilities, and a small start up would be limited to a page or two in terms of what they were able to achieve. And there would be other criteria that would reflect the focus and innovativeness of the firm in terms of where their energies were best deployed.

Some might assume that the majority of the innovation in the oil and gas industry is developed within the large producers. However, I think that is generally considered to be untrue. The small and start up oil and gas firms along with the intermediate producers are probably responsible for the majority of the innovations in the last 20 - 30 years. Professor Giovanni Dosi’s reference to the Schumpeterian hypothesis, “that bigness is relatively more conducive to innovation, that concentration and market power affect the propensity to innovate” and his rejection of that premise is evident in this paper’s following three points.

• First, although “there appears to be roughly a log linear relation within industries between firm size and R & D expenditures”, upon closer investigation, “estimates show roughly non-decreasing return of innovative process to firm size.” This is probably attributable to the fact that very large and very small firms conduct most R & D. p. 1151
• Second, although the expenditures in R & D incurred by large firms are impressive from a total expenditure perspective, the aggregate expenditures of small firms on a global basis becomes far greater in aggregate than the large business. p. 1151
• Third, money is not necessarily a good indicator of innovativeness. Large variances within industries can clearly be identified irrespective of firm size. p. 1152

Therefore “bigness” is not necessarily an element that enhances innovation. This might be intuitively understood by the small oil and gas producers ability to punch above their weight. In the software development business, SAP may do significant generic research in the software development arena. However, they do very little in terms of specific oil and gas research. On the other end of the scale People, Ideas & Objects have completed substantial oil and gas specific research and have commenced the development of oil and gas specific software with the publication of the Preliminary Specification. And I can assure you that at this time we are a very small firm, proving Professor Dosi’s first point.

If we look at Professor Dosi’s second and third point together. It is clear that money is not necessarily a determining factor in innovation. Although large firms spend impressively on R&D, that does not produce a number of usable innovations. And it may be the lack of financial resources that motivate the smaller firms to innovative problem solving on the other end.

Professor Dosi (1988) provides three caveats to the three differences noted.

1. “Statistical proxies cannot capture aspects of technical change based on informal learning” p. 1152
2. Secondly, “differences in businesses and business lines (and business or product life cycles) may provide discrepancies in comparison of “like” firms. p. 1152
3. Thirdly, many firms are expending significant research dollars in keeping up with other firms innovations.  p. 1152

Or in summary, proof that money is not necessarily a determinant of innovative success.

For the industry to successfully provide for the consumers energy demands, it’s necessary to build the systems that identify and support the Joint Operating Committee. Building the Preliminary Specification is the focus of People, Ideas & Objects. Producers are encouraged to contact me in order to support our Revenue Model and begin their participation in these communities. Those individuals that are interested in joining People, Ideas & Objects can join me here and begin building the software necessary for the successful and innovative oil and gas industry.

Please note what Google+ provides us is the opportunity to prove that People, Ideas & Objects are committed to developing this community. That this is user developed software, not change that is driven from the top down. Join me on the People, Ideas & Objects Google+ Circle and begin building the community for the development of the Preliminary Specification.