The Planning & Deployment Interface

It is reasonable to assume that any operation will be using multiple capabilities from the “Dynamic Capabilities Interface” and some of the capabilities may be from different participants. What is therefore needed is the “Planning & Deployment Interface” which is included in both the Research & Capabilities and Knowledge & Learning modules. It is an interface that enables the user to pull the individual capabilities into another interface and organize them in a manner in which they can be used during the operation.

The “Planning & Deployment Interface” has been about the known knowns to this point. There are a variety of known unknowns and unknown unknowns. To document these, if possible, is the role of the team members once the project interface has been processed and assigned. Recall that Professor Dosi states “In very general terms, technological innovation involves or is the solution to problems.” Dosi goes on to further define this as “In other words, an innovative solution to a certain problem involves “discovery” (of the problem) and “creation” since no general algorithm can be derived from the information about the problems. Solutions to technological problems involve the use of information derived from experience and formal knowledge. It is the specific and un-codified capabilities, or tacit-ness” as Professor Dosi describes “on the part of the inventors who discover the creative solution.” A section of the interface should be set aside where the team can collaborate on these points and provide some innovative solutions for the producer or Joint Operating Committee.

I want to reinforce the point that innovation will develop from the interactions and collaborations in the “Planning & Deployment Interface.” We note that the people assigned to the project would discuss the project and raise any issues that they may have and innovation would stem from these interactions. This process that is captured in the “Planning & Deployment Interface” is how the Preliminary Specification reduces innovation to a defined and replicable process.

Professor Dosi notes that innovation is developed through the interactions between the “capabilities and stimuli” and “broader causes external to the individual industries such as the state of science.” These are captured in the “Planning & Deployment Interface” (capabilities and stimuli) and the Work Order system (state of science) of the Preliminary Specification. As time passes the producer augments their capabilities with the findings from their research undertaken in the various Work Orders that are issued. Capabilities are implemented in the day to day activities that the firm is involved in. It is the interaction within the firm and Joint Operating Committee, and the broader causes that create the innovations. But there’s more.

We take the concept of a trajectory, define it, and apply it to oil and gas. The definition of a technological trajectory is the activity of technological process along the economic and technological trade offs defined by a paradigm. Dosi (1988) states “Trade-offs being defined as the compromise, and the technical capabilities that define horsepower, gross takeoff weight, cruise speed, wing load and cruise range in civilian and military aircraft.” People, Ideas & Objects assumes the technical trade-off in oil and gas is accurately reflected in the commodity pricing. Higher commodity prices finance enhanced innovation. These “trade-offs” are very much an engineering approach and therefore I want to reiterate the point that they are “defined as the compromise, and the technical capabilities.”

These trade-offs facilitate the ability for industries to innovate on the changing technical and scientific paradigms. Crucial to the facilitation of these trade-offs is a fundamental component that spurs the change and is usually abundant and available at low costs. For innovation to occur in oil and gas, People, Ideas & Objects would assert that the ability to seek and find knowledge, and to collaborate are two “commodities” that are abundant today. With their inherent low direct costs, knowledge and collaboration are the triggers for a number of technical paradigms which will provide companies with fundamental innovations.

Therefore the ability to collaborate in the “Planning & Deployment Interface” of the Research & Capabilities module is critical to the innovativeness of the producer firm. And by extension, this would also apply to the Joint Operating Committee through the “Planning & Deployment Interface” in the Knowledge & Learning module. Innovation is as much an engineering discipline as it is anything else. And that is how we can reduce it to a defined and replicable process.

The Preliminary Specification provides the oil and gas investor with the business model for profitable exploration and production. People, Ideas & Objects Revenue Model specifies the means in which investors can participate in these user defined software developments. Users are welcome to join me here. Together we can begin to meet the future demands for energy.

The Dynamic Capabilities Interface

The “Dynamic Capabilities Interface” of the Research & Capabilities module is designed to document the capabilities of the innovative and profitable oil and gas producer. Capturing the explicit knowledge of the producer for later deployment by the various Joint Operating Committees in the Knowledge & Learning module. The tacit knowledge, which can’t be documented, is deployed in the Joint Operating Committee through the various tools such as the budget, the Military Command & Control Metaphor, the Work Order and Job Order systems.

The “Dynamic Capabilities Interface” is a wiki style interface that details the specific aspects of the firms capability. Details such as who, what and how of the capability and its implementation. Details that fall within the domain of the earth science and engineering disciplines. Users are then able to view the state-of-the-art of the firms capabilities by reviewing the information that is contained within the “Dynamic Capabilities Interface.” Users are also able to augment the “Dynamic Capabilities Interface” when the firm has achieved additional capabilities through further research, participation in working groups or acquisition of capabilities. Capabilities are sorted based on their key criteria and geological formation so that if those criteria are selected by a Joint Operating Committee, those capabilities from the producer firms that are participants in that Joint Operating Committee will have those capabilities made available to them in the Knowledge & Learning module. The Dynamic Capabilities Interface also has serial numbers for each capability that are unique across the industry. Then users can select a capability and have it easily deployed and communicated with what the Research & Capabilities module calls the football analogy.

It is the transfer of the information from the producer firm to the Joint Operating Committee that we achieve the “moving the knowledge to where the decision rights reside.” Having the Joint Operating Committee select from the many participants aggregated “Dynamic Capabilities Interface” in the Knowledge & Learning module gives them the opportunity to decide the most innovative and profitable route for the property. Knowing what is available to them in terms of capabilities is consistent with Harvard Professor Carliss Baldwins finding that “Knowledge begets capabilities, and capabilities beget action.”

The last thing a firm wants its capabilities to be is static, hence the interfaces name of “Dynamic Capabilities Interface.” It is reasonable to assume that each time the capabilities are used there may be some changes that should be reflected in the documentation of the information. The information contained by the Joint Operating Committee in terms of the “new” information may be held by members of a different firm then the one that is the proprietor of the capability. It is therefore necessary that a “Lessons Learned” interface is developed in the Knowledge & Learning module. This “Lessons Learned” interface captures this new information for the owner of the capability to review and document for inclusion in the “Dynamic Capabilities Interface.”

That is how the Research & Capabilities module enables the producers to develop, implement and integrate advanced capabilities within their organization. The research undertaken by the firm should not interrupt the day to day of the operation. However, when the research augments the firms capabilities the “Dynamic Capabilities Interface” is updated with that information. With these newly augmented capabilities, they will be deployed through to the Knowledge & Learning module, where they can be used and reused by the organization. If the research conducted by the firm is unresolved or undetermined in its conclusion then it would not belong in the “Dynamic Capabilities Interface.” If it remained unresolved or undetermined then it would indicate that further work was required and therefore remain open in a Work Order for completion or resolution.

The Preliminary Specification provides the oil and gas investor with the business model for profitable exploration and production. People, Ideas & Objects Revenue Model specifies the means in which investors can participate in these user defined software developments. Users are welcome to join me here. Together we can begin to meet the future demands for energy.

A Marketplace for Ideas

It is within the Research & Capabilities and the Knowledge & Learning modules that the user has access to the “Ideas Marketplace Blog” interface. An interface that aggregates the ideas from the service and oil & gas industries representatives in terms of “how” and “what” their ideas are for solving the issues within their industries. It is a marketplace from the point of view that the owners of the ideas are publishing them and in turn are earning the rights to those ideas through their publication. That is how copyright works, it is the act of publication that earns the owners the legal right to their ideas that are presented there. In an industry based on science, ideas are an important element of the business.

Now what is so significant about ideas? First it's one of the few areas that computers are unable to provide any assistance in. People are the necessary ingredient in idea generation and application. The second important aspect of ideas is that we are going to need a lot more of them. The volume of ideas that are necessary today are an order of magnitude higher than what were required a generation ago. And the volume will need to be an order of magnitude higher in just a few years time. That is the nature of ideas.

If the innovative oil and gas producer is going to be iterating on the science and technology of the oil and gas industry. They will need to participate in a marketplace that is very dynamic. One that deals in every kind of idea, good, bad, brilliant, dumb or new. For if today it takes one idea to build one unit of value, tomorrow it will take two ideas to hold that value, and five ideas to build another unit of value. Such is the nature of where we are heading. If you’re not participating in the marketplace of ideas then you won't be participating in a market of value.

Having a marketplace for ideas within the Research & Capabilities module is designed to focus the industries attention in one area for all of the latest ideas. It will not be necessary to search the Internet for the next big thing, you know it will be in the “Ideas Marketplace Blog.” That is where the people with the ideas are going to post them, in order to earn the rights and find the market for those ideas. Granted there will be a lot of ideas that will not see the light of day, but with failure there is usually the seeds of success.

Once an idea looks promising the owners and the industry can then move forward with plans to commercialize the product or service and bring it on to the market. This is a role that the oil and gas producers will have to be more involved in. They are the primary industry. They source all of the revenues from the oil and gas sales. They need to support the research and development of products and services in the services industries if they are going to be the ultimate benefactors. Having the service industry divert capital expenditures to R&D activities is not working, will not work, and the expectation is that the service industry customers, the producers themselves, must carry these costs.

One of the advantages of respecting the Intellectual Property of the individuals or companies that present ideas within the “Ideas Marketplace Blog” is that the funding for Research & Development costs will be small. The need, as the producer firms do now, of educating multiple firms on the same technology won’t exist. And as such the producers will be able to focus all of their resources on the one with the ideas and therefore the costs to anyone of the producers will be immaterial in terms of direct costs. The development of the product or service will be able to aggregate the entire industries attention and resources and therefore be able to bring it to market faster and with less cost than in today’s market.

The Preliminary Specification provides the oil and gas investor with the business model for profitable exploration and production. People, Ideas & Objects Revenue Model specifies the means in which investors can participate in these user defined software developments. Users are welcome to join me here. Together we can begin to meet the future demands for energy.

Key Elements of the Research & Capabilities Module

It was in the Preliminary Research report (2004) that we learned the influence that Information Technology (IT) had on organizations. That IT defined and supported our organizations, and therefore it both enabled and constrained them at the same time. The need for the innovative and profitable oil and gas producer to remove these IT constraints requires the People, Ideas & Objects software development capabilities. Then as these constraints are identified they can be dealt with by developing new software to deal with new opportunities.

We have also discussed the current producers capacity to deal with issues are constrained by the systems that are in use today. That we see a repetitive inability, or lack of capacity to deal with the existing issues of the industry. Highlighting just the takeaway capacity and commodity pricing as the two premier issues that we seem to be reliving from the 1990’s. There is also an inability to approach new issues that industry is faced with; such as planning for the unconventional reserves development, and the relationship with the service industry. I have suggested that the industry seems to be in a never ending programming loop of which it is unable to exit. The systems that exist today have us operating from a day to day basis and they are unable to deal with the long term perspective, or any other aspect of the business that is not currently programmed.

This cycle of day to day existence is hurting the industry. The ability to deal with this problem is by adopting the Preliminary Specification and acquiring the software development capability proposed by People, Ideas & Objects. Then the innovative and profitable oil and gas producer will be able to break the cycle of systems dependence and effectively plan and execute the business of the business. Until will we do this, its best to become familiar with the various elements of the repetitive loop that we seem to be in.

The Research & Capabilities module provides another exit from this endless cycle. How does the firm break away from what it has done before and develop its capabilities to enhance its business in the long term. There are a number of things we do in the module that make that happen. The first is brought to us by Professor Giovanni Dosi in the Preliminary Research Report.

• That new science fuels new innovations, and new innovations fuel new science.
• Technical trade-offs facilitate the ability for industries to innovate on the changing technical and scientific paradigms.

It is reasonable to assume that the industry will undergo a large change in the underlying science. This will fuel significant innovations, which will lead to further sciences. In an industry that is based on science its “capabilities” become a key competitive advantage and how that science is implemented within the organization (and IT) becomes one of the primary concerns. Our next quote comes from Professor Richard Langlois.

The question then becomes: why are capabilities sometimes organized within firms, sometimes decentralized in markets, and sometimes coordinated by a myriad contractual and ownership arrangements like joint ventures, franchisees, and networks? Explicitly echoing Hayek, Jensen and Meckling (1992, p.251) who point out that economic organization must solve two different kinds of problems: "the rights assignment problem (determining who should exercise a decision right) and the control or agency problem (how to ensure that self-interested decision agents exercise their rights in a way that contributes to the organizational objective)." There are basically two ways to ensure such a "collocation" of knowledge and decision making: "One is by moving the knowledge to those with the decision rights; the other is by moving the decision rights to those with the knowledge." (Jensen and Meckling 1992 p. 253). p. 9

To be specific, what we are doing in the Research & Capabilities module is “moving the knowledge (contained within the producer firms) to those with the decision rights (held within the Joint Operating Committees).” And this is where the alignment under People, Ideas & Objects begins. What the bureaucracy is trying to do is “moving the decision rights to those with the knowledge.” And that is where the current conflict is being created.

It is these two elements, capturing the iterations of scientific capabilities and moving the knowledge to where the decision rights are held that the Research & Capabilities module undertakes. Although there are other elements involved in the module these are the key concerns and the focus of the module.

The Preliminary Specification provides the oil and gas investor with the business model for profitable exploration and production. People, Ideas & Objects Revenue Model specifies the means in which investors can participate in these user defined software developments. Users are welcome to join me here. Together we can begin to meet the future demands for energy.

Leakage vs. Hoarding

Yesterday we discussed the division of the short term and long term perspectives through the Research & Capabilities module of the Preliminary Specification. But we are talking about more than just the capabilities that each Joint Operating Committee demands when we are talking about the capabilities of the producer firm and the use of the Research & Capabilities module. McKinsey put it well in this quotation.

Ongoing multi-year tasks such as launching new products, building new businesses, or fundamentally redesigning a company's technology platform usually call for small groups of full-time, focused professionals with the freedom "to wander the woods," discovering new, winning value propositions by trial and error and deductive tinkering.

We have detailed that the focus of the producer firm is on its asset base and its earth science and engineering capabilities. This area of focus of the Research & Capabilities module is therefore a key focus of the producer organization. We are not talking about the people that will be deployed in the day to day of the various Joint Operating Committees. These are the core scientists of the firm. The ones who are responsible with developing the key competitive advantage of its earth science and engineering capabilities.

We discovered something very interesting in our research. When we deploy teams of people in a fashion like we are with People, Ideas & Objects use of the Joint Operating Committee. The earth science and engineering capabilities of each Joint Operating Committee will atrophy. They need to be fed a constant stream of new and innovative ideas and possibilities to remain “current” with the science. This of course has to be steered by the mother ship so as to not duplicate errors or replicate blind bunny trails unnecessarily in each and every Joint Operating Committee.

Now it may seem that I have contradicted myself by stating that the firm needs to develop the capabilities necessary “in-house.” But I didn't say that. The Research & Capabilities module should be considered to be from an industry perspective. That although each firm will have specific people defined to support each firms needed capabilities, the service industry will take on a greater role in providing much of the innovative capabilities that are developed through the mindset employed by the producer firms. The in-house capabilities will be from the earth science and engineering point of view.

We’ve talked about the role the producer would have in determining the long term horizon of the firm. How the Research & Capabilities module would provide a window on the various Joint Operating Committees to provide the ability to apply systemic earth science and engineering innovations at each JOC without the risks of unnecessary duplications or repeated following of blind bunny trails. I now want to discuss the risks and rewards of the leakage of earth science and engineering information from the firm through the Research & Capabilities module. As it would be apparent that the level of discussion and collaboration through the partnerships in the Joint Operating Committees, through the industry itself and the service industry in particular would lead to significant leakage of the producers proprietary earth science and engineering knowledge, understanding and capabilities.

Hoarding of Information

In the Preliminary Research Report we learned an interesting point about the producers proprietary earth science and engineering knowledge, understanding and capabilities.

In Brown & Duguid (1998) they make the following observations: “The leakiness of knowledge out of and into organizations, however, presents an interesting contrast to internal stickiness. Knowledge often travels more easily between organizations than it does within them. For while the division of labor erects boundaries within firms, it also produces extended communities that lie across the external boundaries of the firms. Moving knowledge among groups with similar practices and overlapping membership can thus sometimes be relatively easy compared to the difficulty in moving it among heterogeneous groups within the firm. Similar practice in a common field can allow ideas to flow. Indeed, it’s often harder to stop ideas spreading then to spread them.” (p. 102) p. 32

We all know this leakage of information to be inherently true. When someone discovers something that is “news” within the industry, it is generally well known within industry associations for the geologists or engineers as soon as it is known in the firm. It is either imputed through what is known, or the leakiness is as porous as it is. What is a producer firm to do to ensure that the information they have does not leak? I think that the point lies in the meaning of “capabilities”; which is “an aptitude that can be developed” or “knowledge begets capabilities, and capabilities begets action.” Simply it is not possible to stop the leakage. The question therefore becomes, is it best to develop your aptitude by curling up with a text book or to participate in a marketplace. People, Ideas & Objects believes that innovative producers, instead of hoarding the information, will deploy the right information to the right people at the right time.

The Preliminary Specification provides the oil and gas investor with the business model for profitable exploration and production. People, Ideas & Objects Revenue Model specifies the means in which investors can participate in these user defined software developments. Users are welcome to join me here. Together we can begin to meet the future demands for energy.

Separating the Long and Short Term Perspective

We went through the four points from the McKinsey article as to why we should use the Research & Capabilities module for the long term perspective of the innovative oil and gas producer. We now want to revisit the first point of that article and highlight the significance of the opportunity that is presented by separating the long term perspective into the Research & Capabilities module, and the day to day into the Knowledge & Learning module. In the McKinsey article "The 21st Century Organization" it is noted;

The first design principle is to clarify the reporting relationships, accountability, and responsibilities of the line managers, who make good on a company's earnings targets, for all other considerations will get short shrift until short term expectations are met.

By making the Joint Operating Committee the key organizational construct of the innovative oil and gas producer. By aligning the legal, financial, operational decision making, cultural, communication, innovation and strategic frameworks of the Joint Operating Committee with the compliance and governance frameworks of the hierarchy. By providing an extension of the governance structure over the partnership with the Military Command & Control Metaphor. We have isolated the Joint Operating Committee as the day to day operation of the oil and gas producer. This frees up the remaining portion of the producer to concern itself with the long term value generation of the firm.

Recall that these Joint Operating Committees are autonomous in the sense that they are focused on providing the greatest performance. They are driven through the Performance Evaluation module that allows them to determine where and how they can build the greatest value each month. Because they are operated by the partnership, which all the participants are motivated equally by financial gain, the producers will have faith that the “line managers will make good on a company's earnings targets.”

The Research & Capabilities module is looking at the interests the producer has in any number of Joint Operating Committees. This number may total into the thousands. To concern themselves with the operational performance of each would be a daunting and impossible task. And based on the previous paragraph their involvement is limited. However, there may be systemic corporate similarities that can be applied to each that bring value to the overall producer firm. Systemic similarities that can only be seen from the perspective of the firm, and in the long term. These are where the business value can be generated through the use of the Research & Capabilities module. McKinsey notes;

Dynamic management and improved collaboration, as we show later, are better ways of accomplishing the purposes of these ad-hoc structures. A company that aims to streamline its line management structures should create an effective enterprise wide governance mechanism for decisions that cross them.

It is through an iterative and collaborative approach to dealing with the various Joint Operating Committees that the users of the Research & Capabilities module is able to extract the value in the long term. By passing on new innovations or the results of experiments for the JOC to implement. The ability to influence any and all variables and to see any aspect of the firm and to analyze it is the domain of this application module. To define it as a set of fixed functionality will ultimately be the result of what the user community is able to provide, however, I am certain that they will also recommend that the application module remain open to analyzing any and all data.

If we reduce the business of the oil and gas producer down to the activities of the Joint Operating Committee. And concern ourselves only with the day to day activities of the property then we can generally be satisfied that we will know where our next meal will come from. But what about everything else. This is the classic conflict that a business must satisfy, the struggle between the long and short term horizon of the business. How much should be sacrificed in the long term and how much should be sacrificed in the short term? It should be noted that the name of the module is Research & Capabilities, this discussion focuses on the capabilities component of the module.

What is the firm capable of and how can that capability be enhanced? And more importantly since we are so dependent on our partners in the Joint Operating Committee and the service industry how is this apparent contradiction resolved? The traditional steps of the producer was to build the in-house capability. The assumption that is used in People, Ideas & Objects is that the resource constraints do not permit the luxury of each producer building these capabilities. The need to collaborate with partners to build the capabilities needed for the Joint Operating Committee is how these needs are met.

The Preliminary Specification provides the oil and gas investor with the business model for profitable exploration and production. People, Ideas & Objects Revenue Model specifies the means in which investors can participate in these user defined software developments. Users are welcome to join me here. Together we can begin to meet the future demands for energy.

An Introduction to Research & Capabilities

A quick pass through the Accounting Voucher brings us to what has to be my favorite module, Research & Capabilities. This module shares many similarities with the Knowledge & Learning module. The difference is that the Research & Capabilities is a firm, or producer, facing module and the Knowledge & Learning module is a Joint Operating Committee module.

We discussed how the Research & Capabilities module would be used to help build value by managing the transition from the hierarchy to the aligned producer organization under the People, Ideas & Objects software. Where the legal, financial, operational decision making, cultural, communication, innovation and strategic frameworks of the Joint Operating Committee were aligned with the hierarchies compliance and governance. Making this transition will create opportunities for people to make changes to the work that they do in order to be more efficient and effective. What and how the software will do this little bit of magic is best described in a McKinsey article entitled “The 21st Century Organization”. In a four part recommendation McKinsey sets out in broad strokes what is required.

Streamlining and simplifying vertical and line management structures by discarding failed matrix and ad hoc approaches and narrowing the scope of the line manager's role to the creation of current earnings.

The process of using People, Ideas & Objects software will achieve these objectives by aligning all of the Joint Operating Committee and the hierarchies frameworks, imposing the military chain of command and having the financial interests of the producers drive the management of the Joint Operating Committee. We are “narrowing the scope of the line manager’s role to the creation of current earnings.” These are the focus of the Knowledge & learning, Partnership Accounting, Accounting Voucher, Petroleum Lease Marketplace and Performance Evaluation modules.

Deploying off-line teams to discover new wealth-creating opportunities while using a dynamic management process to resolve short and long term trade offs.

These are the critical new roles that are being discussed in these “new” modules “Research & Capabilities” and “Knowledge & Learning.” Providing valuable insight to their users about the business that is above the day to day noise. Where the long term vision of the organization can be set, executed and realized through these two advanced software modules.

Developing knowledge marketplaces, talent marketplaces, and formal networks to stimulate the creation and exchange of intangibles.

Within the Preliminary Specification, if we include the Research & Capabilities and Knowledge & Learning marketplace definitions, we have five marketplace modules in People, Ideas & Objects. Marketplaces are things that people will be doing more of in terms of participation in the future. Computers can assist, but again are generally very poor at making decisions, bargaining, knowing what to do, etc. The other three marketplace modules in the Preliminary Specification include the Petroleum Lease, Resource and Financial Marketplaces.

Relying on measurements of performance rather than supervision to get the most from self directed professionals.

Handing the Performance Evaluation module to the team that is running the Joint Operating Committee will enable them to manage the property in the best possible fashion. They are going to be able to figure out what it is that makes the most sense in terms of value, and begin to generate more of it. It is as simple as that. Except it is a very complex business. And that’s why you have your best earth science and engineering staff on the job. And the best business / geological / engineering minds running the Research & Capabilities module.

It should be coming clearer that it is no longer the 20th century. That to manage an enterprise requires a different approach, and the first thing that is needed to manage that enterprise is the software to enable that approach. With real shortages in the quality human resources necessary to maintain the markets demand for energy, it will be the producer that is able to maintain a high performing organization based on criteria such as these.

The Preliminary Specification provides the oil and gas investor with the business model for profitable exploration and production. People, Ideas & Objects Revenue Model specifies the means in which investors can participate in these user defined software developments. Users are welcome to join me here. Together we can begin to meet the future demands for energy.

Open Charges to the Accounting Voucher

Following on the Partnership Accounting module, the Accounting Voucher is unique to oil and gas systems due to the nature of recognizing the Joint Operating Committee (JOC) as the key organizational construct of the innovative and profitable oil and gas producer. One of the implications of using the People, Ideas & Objects system is that each partner will have access to the Accounting Voucher during the time that a Voucher is either open or closed. Each of the producers involved in the JOC are therefore able to access the Accounting Voucher and have costs / revenues distributed to the other partners involved in the Joint Operating Committee. This is one of the key differences that we had discussed in the Petroleum Lease, and Resource Marketplace modules. Partners are all contributing to the joint account as equal participants with the role of “operator” being relegated to a thing of the past. (Note too of course, that each participant is able to charge their own account with their own 100% charges. These charges are to their private accounts and therefore not seen by any of the other participants.)

Cost control becomes an issue when everyone is able to charge freely to the joint account. A careful reading of the previous paragraph reflects that I didn’t state “charge freely." Cost control comes about as a result of the traditional budgetary control of AFE and the Work Order system that is part of the Partnership Accounting module. Without pre-approval by the partnership nothing is able to be processed by the People, Ideas & Objects software applications. And as we have seen in the discussion of the Security & Access Control module, few will have the authorization to “charge freely” to the joint account in any form or fashion.

With the traditional ability to charge to an AFE or Cost Center, and possibly during the development of the People, Ideas & Objects Preliminary Specification, the user community determines the need to have a Purchase Order system, ensuring that an appropriate bidding and contracting process is in place, no unauthorized amount will be accepted in the system. There is also the fact that each voucher needs to be approved for payment before any money is expended and that approval would need to consider the authority of the joint account.

As one can envision these Joint Operating Committee - Accounting Vouchers can become large as they include all of the business of the property. Accountants would be frustrated at month-end trying to get these Vouchers closed if they had to seek approvals and close each of the transactions within the appropriate small window of time of their month end. Needless to say that each transaction within the Accounting Voucher is a small subset of the larger Accounting Voucher and can be dealt with as a stand alone individual item. Seeking its own approvals and authorizations that deal with just the domain of the specific transaction.

What is different in People, Ideas & Objects Accounting Voucher system vs what exist today is the elimination of the designation of operator. The capabilities for each producer to house the state of the art earth science and engineering resources necessary to run all of the properties within one oil and gas firm is believed to be beyond what is possible in the future. The solution prescribed in the Preliminary Specification is the further specialization of earth science and engineering skills and pooling of the resources of the partnership within the Joint Operating Committee. Therefore charges from each of the participants will need to be processed and paid just as if they were the operator in today’s systems. This will include not only internal costs but also for the field work being done on AFE’s and Work Orders. It may be that any one of the participants will be incurring charges on behalf of the partnership. Therefore the need to have the Accounting Voucher open to the partnership is a necessary evolution of the pooling concept that is part of People, Ideas & Objects Preliminary Specification.

The Preliminary Specification provides the oil and gas investor with the business model for profitable exploration and production. People, Ideas & Objects Revenue Model specifies the means in which investors can participate in these user defined software developments. Users are welcome to join me here. Together we can begin to meet the future demands for energy.

User Based Developments

The comprehensive accounting for the producer firm and Joint Operating Committee is conducted in the Partnership Accounting module of the Preliminary Specification. It is here that you will find the many traditional accounting reports, activities and information for the innovative and profitable producer and Joint Operating Committee. It will be this module and the Accounting Voucher that will be used by the producer, Joint Operating Committee and various service providers to carry out the accounting requirements for those concerns. Each will have access to their domain of information necessary to conduct their jobs whether that is at the producer, Joint Operating Committee or service provider. Security and access control being provided through the Preliminary Specifications Security & Access Control module.

In the high level discussion of the past few months we have discussed the material balance report and its automation of the production, revenue and royalty process once the production volumes are settled. We have also discussed the decentralized production model and how it enables the innovative and profitable producer to eliminate the overhead during times when production is shut-in. These are areas that are part of the Partnership Accounting module, and with the generic nature of the accounting, don’t need to be repeated here. There is one area that we haven’t discussed and that details the global scope of the accounting information of an ERP system. And that is the manner in which the developments have been approached in the industry before.

The myriad combinations of accounting possibilities that happen within oil and gas have to be captured and handled within the systems that are used in oil and gas. These combinations have not been captured in any of the existing ERP systems as of this date. The first aspect of solving this problem is to engineer the solution. Many have tried and have found their budgets to be too small for the job. Approaching this from the one producer perspective may seem like adequate funding, however, no one today is declaring success. If, as we have proposed in People, Ideas & Objects, aggregate the resources of the industry towards engineering the solution, this scope can be scaled, the costs to each producer will be incidental, and the results will be that each producer will realize the full scale of that software development effort.

When an individual producer has approached the development of an ERP system they have been granted a budget that is less than what is desired to deal with the potential issues. When the development begins, the issues become greater than what was expected and the need to simplify the application to meet the budget is the skill of the project manager. Users are rarely consulted as to their needs and are told as to what and when they will transition to a new system. Everyone grits their teeth until someone declares it a success and you hope for a better system next time. At least that is how I see most system integrations.

The first issue is the budget is inadequate to deal with the size and scope of the problems. Once the developers get into the problems, its time to quit and get out. What is needed is a concerted effort that is a quantum of size and effort to determine the issues and resolve them. Aggregating the budgets across the industry from like minded producers presents the possibilities that a budget can be presented to the developers to approach the issues and resolve them.

The second issue, and possibly the biggest is the fact that the user is not a member of the development team. People, Ideas & Objects are user community developments. Having the collective understanding of thousands of individual jobs that are present within the oil and gas industry can only be gained by the direct involvement of those users. To have developers spending time without the direction of users is a waste. They collectively do not understand, nor does any individual, the thousands of jobs that are done in the industry. Therefore the limited budgets that have been used in ERP systems development have been unable to deal with the user environment. And that has been to their detriment.

People, Ideas & Objects have put forward a vision of how the innovative and profitable producer and Joint Operating Committee can function in the future oil and gas industry. It is now for the user community to take that vision and build the systems that they need to make that vision real. This is their opportunity to have the systems necessary to do their jobs and provide the industry with the means to meet the future energy demands.

The Preliminary Specification provides the oil and gas investor with the business model for profitable exploration and production. People, Ideas & Objects Revenue Model specifies the means in which investors can participate in these user defined software developments. Users are welcome to join me here. Together we can begin to meet the future demands for energy.

Two Distinct Lines of Business

We move now to the Partnership Accounting module of the Preliminary Specification. Our first topic of discussion relates to the recent discussion in the Financial Marketplace module regarding the funding of the development of the capabilities of the producer firm. In today’s post we are discussing the second line of business of the innovative producer firm and that is the billing of the earth science and engineering capabilities to the various Joint Operating Committees that it has an interest in. These direct charges are in replacement to the overhead allowances that have been the standard in the industry. And are a result of the “pooling” concept that has been developed in the Preliminary Specification to meet the shortfall in supply of geologists and engineers. There is also the secondary issue of dealing with the specialization and division of labor as it applies to the earth science and engineering work that is conducted in the industry.

If partners are contributing human resources to the Joint Operating Committee then the systems that the partners use should be able to cost these resources, charge them to the joint account, and have their costs recovered by the Joint Operating Committee the resource was provided to. This also brings up the point that if the operator classification has ceased to be valid, the charges for operator overhead, where the recovery of these costs are realized today, the operator overhead charges should also cease to be valid. If three different producers are providing engineers and geologists to the Joint Operating Committee each should be able to recover the direct or standard costs of these individuals for the time they spent working on the property.

The ability to contribute technical resources from each of the members of the Joint Operating Committee and have their costs recovered by the producer firm will help to offset the costs in maintaining their capabilities. In addition the excessive costs of maintaining the capabilities of meeting any and all contingencies as firms do today, are not carried on any specific producers payroll. The bread and butter geological and engineering work can be conducted by specialized service providers in a division of labor that bills these services directly to the Joint Operating Committee as and when required. Understanding that genius is 1% inspiration and 99% perspiration, the 1% can be conducted within the producer firms and be focused on the generation of ideas, and the 99% can be focused on the work of developing those ideas and charging the Joint Operating Committee for the work in a highly specialized, and hence lower cost, manner.

The Partnership Accounting module provides the innovative and profitable producer firms with the ability to capture the time their resources spent on projects within the Joint Operating Committees. We have discussed the Work Order system and its ability to capture the time spent on any AFE or Cost Centre. This time will be automatically aggregated, calculated based on actual payroll burden or alternatively standard costs depending on how industry determines, and bill the Joint Operating Committee for the costs. During the monthly distribution these costs will be equalized and the net contribution will be a revenue stream as an offset for the producer firms capabilities.

This second revenue stream will never cover the costs of the capabilities of the producer. But it will go a long way to providing a base in which to support the firm in terms of the costs of its capabilities. In developing a producer firm it may be possible to rely on the revenues from its capabilities before the revenues from oil and gas begin. The Partnership Accounting module of the Preliminary Specification provides the ability for this charging out of capabilities, capturing the costs, billing and recovery within the system as a base feature of the module.

The Preliminary Specification provides the oil and gas investor with the business model for profitable exploration and production. People, Ideas & Objects Revenue Model specifies the means in which investors can participate in these user defined software developments. Users are welcome to join me here. Together we can begin to meet the future demands for energy.